HorseHerder Report post Posted December 22, 2014 Hello all! Been working away at home, just thought I'd post some work I've done for friends and family ordered for Christmas. Comments, critiques and advice are welcom. My Grandmother asked me to make a belt for her husband, and gave no further instruction, other than it had to be no wider than an inch and a quarter. I'm still new to leatherwork so I decided to go for a plain finish of nothing but neatsfoot oil. Don't know how it will hold up, if anything goes wrong I'll just have another project on my hands. : ) This is a closeup of *ahem* a tractor, with a little bit of doodly stuff behind it. The rest has a basketweave pattern and his initials, HM are at the tip. I finished the edge with gum trag. This one is for a friends' brother. I treated it with vinegaroon and after the rinse cycle, tooled it the next day. Does anyone have advice for tooling/vinegaroon? I thought about tooling first and rooning later, but I can't see how soaking tooled leather would be a good idea. I just find that the leather is a little more difficult to tool than normal after the vinegaroon process. He wanted an arrowhead pattern with his brother's name centered on the back. I finished this one with neatsfoot as well. I read hidepounder's PDF(thanks for that!) on finishing edges and tried to adhere to his method as best I could with what I had. As I said I appreciate all comments and advice! God bless, and have a Merry Christmas! Quote Share this post Link to post Share on other sites
