tinabanana Report post Posted June 10, 2013 im just getting started with tooling and working my way to making some motorcycle seats. I see there are 2 main 'types' for construction. One is to make a top and bottom peice and sandwich them together, the lacing then covers the edge. The other type is to overlay the top peice on the side peice, and have the sides wrap on the bottom. When lacing this type, where do the lacing holes go? do they go the same distance on the top and side peice, or does it maybe go flush with one of the sides. Here is an example i found that shows it flush with the side peice. it might not be a tooled seat (i looks like upholstery leather and machine stitched to me, but still it shows a good example of the lacing position. http://www.jeffreyphipps.com/img4E.jpg Quote Share this post Link to post Share on other sites
