Jump to content

SimonJester753

Members
  • Content Count

    133
  • Joined

  • Last visited

About SimonJester753

  • Rank
    Member

LW Info

  • Interested in learning about
    sewing, braiding
  • How did you find leatherworker.net?
    google
  1. I'm moving out of my current apartment to a smaller place. I will no longer have a room for my work bench. I'm thinking of putting together a minimalist kit that I could take with me in my car, or put on a hand truck and go to a nearby park. I mostly make dog collars from latigo. I use solid copper rivets. Any suggestions for an easily transportable set up?
  2. Thanks for the info. However, I didn't wait. My method worked pretty well. I googled "cleaning leather jacket" and got info about cleaning a jacket in more "normal" condition. Then I had an idea. I googled "cleaning mud off leather chaps," figuring they are also made of garment leather. Some people actually put them in the washing machine. Well, I don't have a washer and the laundromat is fussy about what you put in their machines, so I put it in the shower to hose it off, to remove the mud without abrasion. Then I used a moist sponge with saddle soap, then buffed with a soft cloth. After it dried I noticed a few spots I missed and touched it up. Now it looks better then before I fell.
  3. I was walking my dog in the park after a rain. He got frisky and wanted to run, so we ran down a trail a bit, then we hit a section that was muddy. The mud was slick as grease and I slipped and fell face down. My leather jacket got covered. I assumed the best thing to do would be to let it dry, then flake off as much mud as I could, then wipe with a wet sponge. Even after flaking off the dry mud, there's still a lot of mud on the jacket. What's the best way to go from here? BTW, the jacket had been torn previously and I patched it. I contact cemented a piece of leather inside behind the rip and them used a vinyl paste made for leather repair to fill the rip. It gets set by heating it with an iron.
  4. I was in Tractor Supply Co. and bought a pack of solid brass chicago screws, marketed by Weaver, a few months ago. I antiqued them using a chemical solution meant for antiquing brass and copper. It was a variety pack of screws with 2 different lengths. I really needed them all to be short for the project I'm working on. I went back and they were out of stock, so I ordered some from Tandy. They won't antique. They must be coated with something to prevent tarnishing. I happened to be in Tractor Supply again and they had Weaver brand chicago screws, so I bought 2 packs. The packaging was different. That did make me wonder if the contents were the same. Well, they're just like the Tandy screws– can't get them to antique. What solvent would you recommend to clean off the coating? Or do you have an easy way to shorten the female end of a chicago screw?
  5. I got a strap pre-cut to width and the edges were already rounded. They still needed to be burnished. As compared to latigo, the leather seemed to bruise and show marks easily, if I slipped while burnishing. Part of that may be just because most of the latigo I've worked with is black or dark brown and the harness leather was a medium brown. I bought a side of black latigo when I was starting out. I still have a bunch. I'm still experimenting with edge finishing.
  6. Try Ohio Travel Bag. I found this place today: http://www.buckleguy.com I haven't had a chance to check out the whole site.
  7. I'm no expert, but I'd say you don't need to seal it. The only time I used a sealer was on the inside of a black latigo collar that seemed to be rubbing off. The dog that it was going to was white and I thought it was best to seal the inside. I recently made a collar from harness leather. I like working with it better than the latigo– it skived easier. The latigo is kind of rubbery, while the harness leather was firmer. I would use a conditioner and or oil it. Oil or conditioner will darken the leather.
  8. http://blog.craftzine.com/archive/2009/07/how-to_leather_dog_collar.html I've been using the pattern from this article. I have the dog's owner measure around the neck up near the head with a tape measure. I tell them to make it snug– no room for fingers under the tape. So far, no complaints about fit.
  9. If you want a concho to go with that they have them here: http://www.antik-group.com/epages/es122041.sf/en_US/?ObjectPath=/Shops/es122041_REPLIKATE_DER_ANTIKE/Products/%22GREEN%20MAN%20ZN%20925%22 They have different finishes available, too.
  10. I ordered from the website, not Ebay. You enter your zip code and click on a button and it shows you the shipping charges, and standard shipping came up $0.00.
  11. I just tried Steck. Great prices, no tax and FREE shipping if I used "standard" shipping, which I did.
  12. Somewhere I recently saw a book about the care and use of leather tools. I was clicking around on the internet, looking for something else and so I moved on, assuming I could easily find it again. No such luck. If anyone can point me to a link for the book, or just give me a title I can google, I'd appreciate it. I have a granite slab on my bench. I don't do much stamping. I noticed that it's not sitting flat. I'm guessing the bench is not perfectly flat and so it's wobbly. I wouldn't want to do and pounding on it as if it's not sitting firm it could crack. Do most people just put the slab on the bench or do the cut a hole and set it in the bench? How do you get your slab to sit perfectly flat on an imperfect surface? I'm trying to figure out how to properly light my work area. My workbench consists of a long desk that originally housed my computer, printer and scanner. It's a formica countertop on top of 3 file cabinets. The cabinets are on wheels, (the wheels may soon be history). I have cabinets above the desk and a florescent tube light mounted under the cabinets. This lights the back half of the bench, but the stuff I'm working on ends up back-lit– not very good foe seeing what I'm doing. The overhead room light does not help much, as my body ends up casting a shadow right where I want light. I also have a halogen torch lamp that shines up at the ceiling. This adds a bit of ambient light, but that's it. I'm thinking I need some kind of swing arm desk lamp. Any recommendation as to make or model of lamp? I'm thinking the base of a desk lamp might get in the way if I'm working on a big piece. Thanks.
  13. I wanted the collar to be a bit wider, too, but I was working from pre-cut harness strap and 1.5" was the widest I could find. Thanks for the link. I check them out.
  14. The rivets are to hold the buckle and "D" ring. I antiqued the buckle and "D" ring using JAX Pewter Black solution. I'm wondering if 4 rivets is overkill. Maybe just 2?
×
×
  • Create New...