Jump to content
akuluka

357 Magnum Special Short & Lady Gun Holster

Recommended Posts

Hi all,

I'm looking for help on a holster pattern for an 357 Magnum Short Special and Reck Lady Gun, Germany made. Because of the law here, so my client couldn't send me the piece so I can't wet mold them.

I'd be most appreciative for any help or advice.

Thank you very much!

Salam from Bali, Indonesia

here's the image.

IMG-20141123-WA0003_zps2be9a783.jpg

IMG-20141123-WA0006_zps96f3e499.jpg

Share this post


Link to post
Share on other sites

To be honest it will be really hard to make holsters for those with out the gun.

Share this post


Link to post
Share on other sites

Since you can't get the guns themselves, I suggest using the measuring process listed in this tutorial: http://leatherworker.net/forum/index.php?showtopic=19338

Have the customer trace the guns, then measure around them with a cloth tape at multiple points, then write the measurement on the tracing. It would be best to build a template to approximate the difference between the tape and a strap of leather, but you should be 'okay' if you just add 7-8mm to the measurements.

That will give you a "close fit", but will never match the precision of actually having something with which to mold.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...