Jump to content

billybopp

Members
  • Content Count

    1,860
  • Joined

  • Last visited

4 Followers

About billybopp

  • Rank
    Leatherworker.net Regular
  • Birthday 07/06/1964

Profile Information

  • Gender
    Male
  • Location
    Pennsylvania, USA

LW Info

  • Leatherwork Specialty
    Strap goods, cases, etc.
  • Interested in learning about
    There is always more to learn.
  • How did you find leatherworker.net?
    Recommendation

Recent Profile Visitors

15,612 profile views
  1. That looks nice! If you're doing a full length belt, consider turning it by 90 degrees so that the rest of the belt can hang out front to back and not interfere with movement of the laser tracks at the side. Also, consider putting a small index mark at the very edge of the belt, and one on your jig to help alignment as you move on to the next segment of the pattern. If the index on the belt is small enough, you can probably remove it as you bevel the edges. As for, using the laser in place of a swivel knife, it might work but unless you can adjust power to change depth of cut on the fly you will not get some of the finer control of trailing off lines that you'd have with a swivel knife. Even if you CAN control that depth it's likely a lot of work to get the software to do what you want. That's probably worthwhile if you intend to make a lot of the same belts, but likely not worthwhile if you're making just a few. Just my thoughts - Bill
  2. It's not uncommon to add a very light coat of NFO before dying. Folks say that it helps even out the dye when applied. Some will even mix NFO and dye. I haven't tried either and can't attest to whether it works or not. - Bill
  3. Congratulations! To the great suggestions above, I'd add a small inspection mirror, a small flashlight, a nut driver set (Klein tools has a great new set with hollow shafts for longer screws), a little organizer box with common sizes of small screws, C and E clips (they have a way of flying away from you to God knows where when you remove them), some spring hooks, and for hex wrenches get the ball end ones, they're great! I'd add some slip stones to your abrasives. Consider a backpack tool bag to carry tools around, it'll spread the weight over both shoulders (your back will eventually thank you!). Over time, you'll figure out what you use most and should carry around, and what is useful but better left in the workshop. - Bill
  4. I had a skinny leather tie in the 80s and loved it! It's probably still around here somewhere. - Bill
  5. I totally get it with doing your best possible work, but consider that you do sometimes need to work to a price point. It's the same with just about everything on the market today. VERY few people have an unlimited budget, but some are much bigger than others. You don't want your less expensive products to taint people's opinion of your more expensive ones. One way to do that? Branding! Release less expensive, plainer, perhaps even less durable products under one brand, and then higher end more expensive products under another brand name. It happens in the business world all the time ... Sometimes everybody knows about it such as GM with Chevy, Buick, Cadillac, etc ... Other times, brands that you buy every day are owned by the same parent company but few people know it!! Just a thought - Bill
  6. When I started doing leather stuff, I bought some Tandy kits. It was good to get a feel for how to put things together. Since then, I've bought others but the first thing I do with them is to make a pattern from them! I put the kit together to learn where the "sticking points" are in assembly and other details, and also use them to try out my first thoughts on decorating and colors. They generally come out OK, but what follows is usually much nicer when I use the templates to cut out my own version, use proper chisels to make sewing holes, and any other changes! The kits they sell tend to be attractive, nicely proportioned, solid designs that are then buggered up with huge stitching holes, the simplest possible way to attach hardware, etc. There are a lot of relatively simple improvements to be made by anybody with some experience under their belt. - Bill
  7. I was tempted to order a sample, but shipping is $10!
  8. billybopp

    smoking cap

    ... I see what you did there! LOL - Bill
  9. Roller diameters do differ some, but there are limitations on how big machines will take. -Bill
  10. That's definitely Dan Akroyd, but that must have been edited in by somebody. He would have been around 10 years old when that episode came out, and there also wouldn't have been a cassette player at the time. - Bill
  11. Gremlins show up on airliners too ....
  12. Roller embossers and plates both have their place. Rollers are generally easier but are more or less limited to patterns that repeat at up to about 4 or 5 inches or so (depending on the outer diameter of the roll). If you want a more varied pattern, you CAN use rollers and switch them out for different sections, but that is a huge pain to get things lined up right. For those more varied patterns, embossing plates are a better choice. It's relatively easy with plates to mix and match patterns for a wider variety of items. - Bill
  13. I suspect that those are not embossed with a roller, but rather embossing plates. Look at the topmost blue belt and you can see a slight separation between embossed sections. It's noticeable with some of the others as well. Also, agree with @GatoGordo they are likely dyed the base color and then block dyed black after that. - Bill
×
×
  • Create New...