Jump to content

Shurgosa

Members
  • Content Count

    3
  • Joined

  • Last visited

About Shurgosa

  • Rank
    New Member

LW Info

  • Interested in learning about
    material durability in # of decades.
  • How did you find leatherworker.net?
    word of mouth
  1. long story short I made a belt, put 3 coats of black dye on it, the 2 coats of feibings tan-kote and then realized that because of my hugely inadequate buffing procedures....the dye is running...:( so I've been BUFFING and WASHING the dyed belt ....doing everything i can think off to remove that excess dye... is there any sure fire tips to either get rid of the running dye....help it completely dry or cure...? is buffing the best thing to do? im prepared to buff it until my arms fall off if that is a tried and true measure..should i wash it a bunch more times? ill do anything.... Thanks fro your time. I have searched around A LOT to see if a guide was available...but nothing popped out... -S
  2. Thanks for the info. 1---------When wet forming leather, is it possible to soak only the section I want to form and get the same result? ( The front edge of the tool pouch dipped in water to rather than submerge the whole front piece...) 2--------also what are the typical times i should adhere to? how long should the leather be left in the water? 3--------how long should the clamps be left on to hold the leather in shape? 5 minutes? or more like 10 hours? a lady at the leather shop said if you leave it clamped overnight it will mold.........is that true? 4.--------can you by stainless steal rivets? designed to outlast leather?
  3. Im in the process of creating what I hope to be a heirloom grade tool belt. my goal is to focus on all the tiny little details so I end up with the durable item I can build. please allow me to emphasize though, im not interested in how nice it looks. I just want it to be obscenely durable. I want to ask a few intricate questions first. I can look up answers to the basic stuff on my own. SO heres what im curious about: 1. im using solid copper rivets. how long do they last? do they rust? are they the strongest type of rivets? -- 2. im looking for a leather conditioner. what I want is a lotion or oil or something that "moistens" the leather. some types of conditioning products people have advised me will work well at first but are allegedly not good for the long term. if i wanted to keep a cowhide tool pouch looking new for YEARS. what is the best product? --- 3. when punching the holes for the rivets. is it better to make the hole slighly smaller than the rivet for a very tight fit? or should the rivet slide easily into the hole? does one way cause undue wear on the rivet hole? --- 4. how tight should the rivet and washer be? like pounding a nail into a deck board? or just fairly snug? --- 5. I'm considering riveting the whole thing because the pockets do not have to have to be stictched fully closed around the bottom and sides. but a friend of mine mentioned contact cement. so in a few sentances. how to specialized leather adhesives hold up over time? --- 6. all the thread is listed as "strong"....but what kind of thread is the strongest? which thread would be the best to tow something with? Thanks in advance!
×
×
  • Create New...