Grey Drakkon Report post Posted January 27, 2016 I have a customer who brought in a bunch of stuff to get framed (my day job) and one of those things is a leather name badge from their father's WWII uniform. The thing is, they're doing multiple frames and don't have enough of them for everyone, so they were hoping to get some duplicated. Does anyone recognize the font used for the lettering? You can see that it was done by hand with a single stamp at a time. The R's in particular are quite distinctive, and the center of the E is as well. Any help would be greatly appreciated! Quote Share this post Link to post Share on other sites
King's X Report post Posted January 27, 2016 Not Times Roman? It looks like typewriter font. Quote Share this post Link to post Share on other sites
Grey Drakkon Report post Posted January 27, 2016 It's likely a typewriter variant, but I'm hoping for the EXACT font/tools used. Nothing I've found so far gets it quite right, the E especially. Quote Share this post Link to post Share on other sites
Studio-N Report post Posted January 27, 2016 they are only 1/8" tall. they could be a machinist punch set. Quote Share this post Link to post Share on other sites
Grey Drakkon Report post Posted January 28, 2016 ...They're 1/4". My bad for not lining it up on the proper spot. Quote Share this post Link to post Share on other sites
SmokeyPoint Report post Posted January 28, 2016 I think you're looking for something like this: http://www.ebay.com/itm/us-military-letter-number-brass-punch-set-marking-outfit-leather-stamp-tools-/251232715354 Although that set looks to be italicized - and sold. Quote Share this post Link to post Share on other sites
stelmackr Report post Posted January 28, 2016 Could try the following: https://www.myfonts.com/WhatTheFont/ http://www.fontspring.com/matcherator http://www.identifont.com/ http://www.fonts.com/id/by-sight http://www.digitalscrapper.com/blog/identify-font/ http://www.vandelaydesign.com/font-identifier-tools/ ...but I don't know if it help you find the tools. It would help you identify a font that may be able to find a letterpress metal type set that could be used to to impress into leather. Examples can be seen here: http://aaleatherbigbookcovers.com/download/Typography%20in%20Leather%20Article.pdf Hope this helps. Bob Stelmack Quote Share this post Link to post Share on other sites
stelmackr Report post Posted January 28, 2016 Used one of those font searching tools and came up with this: Bob Stelmack Quote Share this post Link to post Share on other sites
Grey Drakkon Report post Posted January 29, 2016 Thanks for the help, everyone. Looks like they're willing to settle for a different size and look after all. I'll be keeping an eye out from now on though because some of those kits look neat. Quote Share this post Link to post Share on other sites
ConradPark Report post Posted February 4, 2016 An alternative would be to take a high resolution picture that is taken straight from the top, trace the outlines and vectorize them in Illustrator or similar software and then have a debossing stamp made from the pattern. That way you would get a exact duplicate. A white metal plate shouldn't cost you much more than 20-30 dollars for that size, maybe even less. Quote Share this post Link to post Share on other sites
stelmackr Report post Posted March 16, 2021 Corrected link to article. Had some issues with internet. That article on Tutorial--Typography in Leather has been moved to: https://drive.google.com/file/d/1qgV6aH_FkHa5lBX_kNceroW2elQju_XW/view Quote Share this post Link to post Share on other sites
