Jump to content

jimsaddler

Members
  • Content Count

    211
  • Joined

  • Last visited

About jimsaddler

  • Rank
    Member
  • Birthday 06/14/1944

Profile Information

  • Gender
    Male
  • Location
    Childers, Qld, Australia.
  • Interests
    Keeping the interest in Australian Saddle & Harness Making Trades alive and sharing Trade knowledge.
    Fishing. Tropical Fruit Growing.

LW Info

  • Leatherwork Specialty
    Saddler & Harness Maker
  • Interested in learning about
    Anything Old in Leather.

Recent Profile Visitors

11,593 profile views
  1. Hi Jim

    Just reading an older post on BUSM A1

    Wondering if you still had any parts for the A1

    Regards Tim 

  2. Hi Terry It would have been nice if you answered the note that I sent you on Face Book. I have included it under to remind you. I think that you have been misled to put this Notice in the Forum. I do note you told me the motor was working alright. The past year has been a write off for me as I told you. I apologise if you didn't get the Messages, Honestly I thought the Roller Guide had been sent a long time ago. I do not ever try to cheat any Customers. Quite the contrary I try to help where ever I can. I will catch up with you as soon as the new shipment of parts arrive, possibly in April. Sorry for the mix-up if you knew me personally you would not say these things as they are Defamatory. The Cowboy Machines are much Better than the Colt by the Way as I have had to recondition some near new ones with new Structural parts. Kindest Regards. Jim Saddler. I am sorry for the problem I've been in and out of Hospital all last year, added to that My wife has cleared out with a Jail Bird. You may even know him, he;s from Darwin, ................., now on the run for not reporting to his parole officer. Anyway My problem is that the Machine Motor parts have never arrived, The roller guide was put in a Bubble pack to send as soon as the Motor part arrived. Now its gone missing too. Probably put in the Garbage by my Ex. My next shipment should be loaded in late March/ April and hopefully the parts will be in it. I'm not trying to rip you off this has been a year not to remember as it wore me down so much and I've still got 2 operations to go. Must go now and sort out another problem with my family. Kindest Regards. Jim.
  3. Give me a ring on 07 4126 2241 or mail to <gsaddler@bigpond.com> and I can help you with your choice. I'm in Q,land. Cowboy range is the best choice and we have them and use them. Kindest Regards. Jim Saddler
  4. I couldn't have said it better "Now, the REASON an awl is preferred over a drilled or punched out hole is that an awl's hole will close up around the thread to keep out dirt, grime, and gunk that can deteriorate the thread. The awl pierces the leather and more or less 'shoves' the leather out of the way....and it'll move back in time to where only a slit marking the width of the awl will be visible. A drilled or punched hole removes the leather from the hole, and while it may close up a bit, it'll never fully close." I endorse what you are saying as it is a basic reason why Hand Sewing has been arround for thousands of years and hasn't changed basically. I will try to get some examples of proper Hand Sewing posted if I can get assistance on the Camera. Kindest Regards. Jim Saddler.
  5. Proper Hand Sewing usually runs at aprox 3 to 3.2 stitches per minute if done with the Awl and Needles being the only implements. That is at #8 per inch. Pre Drilling or punching holes and the like is much slower and inefficient. All good stitching takes is practice and patience. I used to have Ladies stitching for me who would average up to 30inches per hour at #8spi all day on heavy 10-12mm Harness Traces. Also they were as neat on the back as the front. The secret was loud Church Music! They just did it mechanically while listening to the Music. 240 stitches every hour for 8 hours per day and then do 4 hours overtime after a meal. So come on you Stitchers give it a go, there's only one method that is worth using and that is use the Awl to make the holes and don't put the needles down. It's the fastest way and the best. Kindest Regards. Jim Saddler.
  6. Use a firm Punch Board to punch on. I use a Lead block. Nylon cutting Boards are good, end grain Hardwood etc. I never drill because of the burning effect of the Drill bit friction. Kindest Regards. Jim Saddler.
  7. Hi Art You appear to be lucky. If the Chrome is chipped or removed then it is for sure it will mark damp or moist Leather. Also the Feric residue will be left on dry natural Veg and many times when it is damped it will cause a stain. This is born out by so many others in the Leather Trades being aware of this. As you should be aware with your extensive knowledge of Machines. Steel, cracked Chrome or chipped Nickel plating and Damp Veg Tanned Leather don't mix!! So might we please get on with the job of enjoying the Forum and not try to build up one Machine above the other. Steve is a nice Guy and sells a nice Machine. It seems he doesn't require all of this help to sell his machines especially on the Forum. Especially when you are going against the established well known knowledge of the Leather Trades. Stainless doesn't Stain, Steel does unless it's properly plated. Hence Stainless can be ground, shaped to suit and Polished without causing problems. Please Have a Happy Day. Kindest Regards. Jim Saddler. Hi Jim, I can agree with the part on altering the foot. I have never experienced problems with marking as you describe. I have modified feet for particular operations and have not had trouble with them even though I took the chrome off. When I approched this with Steve (Cobra) he started manufacturing those feet and including them in his accessory package. They produced what I required. Art
  8. Hi Art As the one who sugested that Cowboy create the Stainless Steel Feet, Needle Plates. As a user for some 50 odd years of Sewing Machines on Leather, I have found that there is Leakage from all Chromed or Nickel Plated Feet! Good Leather contains Tannic Acid and or other Acids which react with these Platings to cause Ferric Stains on Damp Leather, especiallywhen there is slight damage from wear and tear. My Father who was a non-ferris and Feric Moulder, advised me many years ago that Stainless Steel was the only way to go to find Feet or Needle Plates that would not leave the Grey to Black stains on Damp Leather when sewing. Also the resulting items could be altered and Buffed up without affecting the stainless capability they posess. Cowboy took my advice on board and after a bit of trial came up with the Feet and Plates that are supplied at no estra cost to the Buyer. Result! Say you want to alter the Harness Foot set to sew very close up on Buckles or Rings. Just grind more off the Heel and Toe the Buff it up to shine again, then use it! "No discolouration of the Leather". Just a wonderful practical and efficient Tool that save time and effort without cost. Plated Steel Feet etc are now superceded, thank goodness and Cowboy have followed the Tradespeoples advice all the while and produced what we require. Hence the reliable products of to-day. Kindest Regards. Jim Saddler.
  9. Easy answer! Practice, Practice, Practice. Then when you think you've practiced enough, do some more practice!!! Several points I see. your thread should go around the second tension roller a second time to create even pull. you have to perfect your position on turning corners (the needle should have just picked up the thread before making a turn) Stop with the Thread take-up arm at its highest point so the is no slack to pick up. also hold the ends of your threads firmly when making the first few stitches to stop tails getting under the needle plate. Oil the machine regularly. This looks like it is in very good order and should do the work you want to do easily. The old 45K25 is still one of the best Leather Machines that was ever produced. I still like them for decorative stitching on Patent Leather up to 3/8" thick. The Stand is a Gem, made the way they all should be made! 4 cord or #18 Linen thread is what they were made for so perservere and you will learn that you have a good one. Also please remember that the roller Foot is pressing on the one side so you have to counter by ever so slightly putting pressure on the other side as you feed it through. So go for it and practice, practice and practice, then when you are sure you have it right, have another practice. Kindest Regards. Jim Saddler.
  10. Hi Barra I couldn't have said it better. The only difference when I make loops is my Clams are like mini Stitching Clams made from a 1'" x 1/8" Stainless Steel that I ground to shape of a pair of Clams with 1/2" jaws each side then carefully folded in the middle to shape to allow them fit nicely but leaving a space of aprox 1 1/4" for Spring, hey presto 40 years later they are still prefect for the Job of being inserted in the Clams to hold the Loops. My originals were made of Galvanised Iron sheet cut to shape with snips. but they didn't last more than 6 months at a time. Hence the use of SS Steel. They are also used for holding the Billet Hooks in place while sewing them in. Kindest Regards. Jim.
  11. Quick comment on the 45K 25 Clones. Even stitches are achieved by Operater Skill! Hand pressure is applied fore(rt hand) and aft (lft hand) to make sure the Materials are fed through evenly. Buff the Feed Dog teeth very well and the Dog won't pierce the underside of the work. Then simply rub the marks with a piece of heavy canvas to rub them out. For Skirting Leather damp it slightly then rub it out. These Machines were developed for use with proper Veg Tanned Leathers like Bridle or Harness which don't mark very badly. Lets face it Veg embossing is not properly finished Leather, so it is expected that there will be some finishing involved before it is finished for use. Kindest Regards. Jim Saddler.
  12. Please guys and Gals I've stayed off commenting on this subject as it is so mixed up by too many cooks spoiling the Broth. Simply said Resin (Rosin or whatever) 2 part, Beeswax 20 parts, Oil 1 part (Olive, Linseed, Castor,etc) Melt Resin in Double saucepan or Smaller Saucpan in Pot of boiling Water. Add oil gradually when melted to combine. Add Beeswax in slivers or crushed gradually to combine with Oil & Resin. Check that Resin doesn't cool and go streaky as you go, if so stop adding wax till the mix is hot enough to continue. When all is combined properly it will be clear. Pour into Bucket of Cool (room temp) Water carefully in several portions, to form a clump. Take this from the Water carefully and start to squeeze the water out carefully. fold the cooler outer crust into the hot core this well even out the temp of the wax into a plastic lump. Keep squeezing the water out and kneading the wax all the time. The mix should not stick to your hands at all!! Break off lumps about the size of a Hens Egg and knead them into Egg shapes. Then repeat with the other wax which should be still up to Temp from sitting over the hot water. The oil is the varient for Summer or Winter Wax, More for winter less for Summer. Resin is constant always at 1 part to 10 Wax. This wax doesn't respond to pulling, as this is Saddlers Wax. Black Wax is the one to pull as the Pitch responds to the pulling like Toffee. In the old days White wax was pulled because White Lead was added for the Whitening effect. Nowa days we know that this Was was the cause of Illness or premature Death by Lead Poisoning of a number of stitchers who used such. I've used this recipe for some 50 years without much change, it stays cleaner and lasts longer on the thread if properly made and used. More Resin makes a dirtier Job as sticky hands accumulate dirt easily, so shorter threads have to be used. Good sewing is done with Long clean threads. I hope this will clarify this subject better. Kindest Regards. Jim Saddler.
  13. Hi Robc Left handed makes a lot of difference. I had a worker who was left handed and while she was learning she could never make a good stitch as she was copying us RT handers. Then she took her Awl and Needles home and came back stitching her way which was back to front to our way. Suffice it to say she ended up as a very fast stitcher and very neat without using a Pricking Iron. Her stitching was the same slope as a Sewing Machine. What you need is lots of practice, try a Waxed Braided Polyester Thread. There are pricking irons for LH stitchers in the UK if you ask arround. Maybe The Whiskered Bat might get you a lead. What I see in your photo's is a reasonable effort just needing practice and a bit more practice. By the way through your back stitch forward and up over the needle to get you front side looking right. I hope this is of help to you. Kindest Regards. Jim Saddler.
  14. No Qld is safe as long as you stay out of the Big Cities like I do. See what you can find in Leather there as all of our Leather is imported now unfortunately. It may be a cost advantage, if reliable. I look forward to helping. Kindest Regards. Jim.
  15. Hi Pinsplitter One of the comments was right. Start with a prototype and then work out what is required to produce the end Product. If you are back in Australia you can come to to Qld to my Workshop and Fiddle with the Cowboy range of Machines and I have a good stock of Leather. Its a service I run for other Saddlers and Harness Makers to improve their Skills. (I'm semi retired but can't let go of My Trades of Saddler & Harness Maker). So this is how I keep my Brain active, by sharing. I made a number of Golf Bags over the years, utilizing the normal Shop Machines like the 45K25 and a bit of Hand Sewing for closing. Nowa days we have such beaut Machines to use like the 441 class, the Bags can be made and turned with ease. My experience with the places you mention is not good as unless you can be there watching every day. You'll end up broke like the many who went before you. I spent 19yrs in the Pacific and was called the Survivor because I was able to survive the Shrinkage (Theft) that is naturally occurring. The offer is there if you want it.<gsaddler@bigpond.com> Kindest Regards. Jim Saddler.
×
×
  • Create New...