rmr Report post Posted January 25, 2012 Does anyone know of somone who makes an acrylic leather slick for seat work - like Jermiah Watt uses on his video?? If not is there anyone else out there that would be interested in one? I found a glass store here in Dallas that will make them from 1/2-5/8" thick plexiglass if they are provided a shape to go by- which will be easy to do. I suspect there will be a minimum order reqiured to have them order the material. Thanks RMR Quote Share this post Link to post Share on other sites
Timd Report post Posted January 25, 2012 Do you have a picture or dimensions? I haven't seen the video, but I've made some acrylic slickers. Quote Share this post Link to post Share on other sites
rmr Report post Posted January 25, 2012 Do you have a picture or dimensions? I haven't seen the video, but I've made some acrylic slickers. Tim My best guess watching the video is its about 11-12" long, probably about 2-3 " wide and about 1/2-3/4 thick. It is shaped somewhat like a bananna or a boomerang with a gentle convex curve on the front edge and a has a concave back edge, the two sides are also rounded with sightly differrent radiuses (sp??) - it looks to me like all 4 edges can be used for differrent places on a saddle. All the edges are rounded off I can certainly draw what it looks like RMR Quote Share this post Link to post Share on other sites
Timd Report post Posted January 26, 2012 Any details at all will help. Quote Share this post Link to post Share on other sites
rmr Report post Posted January 26, 2012 I will try and draw a picture and post it latter tonight RMR Quote Share this post Link to post Share on other sites
rmr Report post Posted January 26, 2012 Tim I attached a scan of what I was thinking of regarding shape Quote Share this post Link to post Share on other sites
Timd Report post Posted January 27, 2012 I'll see what I can do....... Quote Share this post Link to post Share on other sites
rmr Report post Posted January 27, 2012 I'll see what I can do....... Tim I have a second shape that I might also want - if you are up for it Let me know. I can mail or fax original tracings I have made of both shapes . I will need all the edges rounded off, and would prefer this made of 1/2-3/4 material- Im thinking the thicker the better. What do you think they would run? Thanks RMR Quote Share this post Link to post Share on other sites
Timd Report post Posted January 27, 2012 The thickest I'll have is 1/2", and we can talk about price later, ok? I have to see if there's any scrap at work.... Quote Share this post Link to post Share on other sites
rmr Report post Posted January 27, 2012 I think a 1/2 " thick will be just fine Quote Share this post Link to post Share on other sites
Rickdallas Report post Posted February 27, 2022 On 1/27/2012 at 4:08 AM, Timd said: The thickest I'll have is 1/2", and we can talk about price later, ok? I have to see if there's any scrap at work.... Timd, we need about 5 or 6 pcs sir... would you be interested? please reply with cost, thank you Rick Quote Share this post Link to post Share on other sites
