Jump to content
sharkeyfinn

How Do I Avoid This

Recommended Posts

hi everyone, i had my first custom order this week,which i was pleased about, however, the customer wanted the antique tan finish,and this happened

med_gallery_45327_2108_996167.jpg

med_gallery_45327_2108_92712.jpg

i applied the antique gel with a dry dauber, and didnt notice any blemishes in the leather before i applied the dye, but this was the result, needless to say the customer wasnt interested in buying this,which was disheartening as i had carved a dog or her choice into it,

however, i decided to try a work around and came up with this

med_gallery_45327_2108_632773.jpg

happily the customer saw this on my facebook page and swore at me (in a nice way ;-) ) and wants to buy it again.

obviously i would like to avoid the above problem.so any hints would be much appreciated . ;-)

Share this post


Link to post
Share on other sites

I would use denatured alcohol on the fresh leather and after that neatsfoot oil.

If you see any sign after that then let the neatsfoot oil soak in for a couple of days and then try a deglazer..

Share this post


Link to post
Share on other sites

I would use denatured alcohol on the fresh leather and after that neatsfoot oil.

If you see any sign after that then let the neatsfoot oil soak in for a couple of days and then try a deglazer..

X2, great advice from Tree Reaper, I also clean my leather usually with Oxalic Acid (I use Barkeepers Friend which is available in most Lowes, Home Depot, etc, then mix 3 teaspoons of it to 1 pint of distilled water, dissolves easily, just shake), I use a sponge and wet it in the mixture, then "scrub" lightly, then I wipe the surface again with clean water to remove any remaining chemical. It will remove most impurities, some of yours looked to be abrasions, hard to tell from a photo, but if that's the case, then it's just bad leather. I look for abrasions, marks, etc when I start wetting the leather for the casing process, but it doesn't always show all of them up. Tree Reapers advice will identify most inconsistencies in the leather. I just noticed that the marks on yours is spaced and looks sort of like finger prints, you or someone else may have handled the leather with something on their hands, finish, gum tragacanth, just about anything.

Hope that helps,

Chief

Edited by Chief31794

Share this post


Link to post
Share on other sites

That is the leather not the finish you applied. I don't think it will l come off.

Share this post


Link to post
Share on other sites

An old carpenter mentor's favorite saying (one of them anyway) was that the expert was NOT the one who did not make mistakes: he was the one who figured out how to do something with it so it didn't look like a mistake.

Your black "2nd effort" proved that point.

Good job, . . .

May God bless,

Dwight

Share this post


Link to post
Share on other sites

That is the leather not the finish you applied. I don't think it will l come off.

I agree. The color pulled the imperfections that were already there.

Share this post


Link to post
Share on other sites

Hi There

Just a thought, if that was an antiquing gell you used you don't mention first applying a resist of any sort. If I aply my feibings acrylic antique on naked leather. That is what happens unless I use a resist first. I use leather sheen rubbed on thinly with a sponge most often (a couple of coats, be sure to gently wipe off any pooling or bubbles with a dry bit of the sponge). I can only afford crap leather but using a resist helps. Even if it says "all in one finish" I don't believe it. I use a resist for antiquing. I like your fix though it looks great.

Cheers, Toolingaround

Share this post


Link to post
Share on other sites

It's not a good idea in my opinion to use antique finish on naked leather. First dye it light tan, than a coat of leather balm,buff, than apply the antique finish.

That's why it's called finish. Learned that from, Paul Burnette.

PS, also you could use the oxalic acid FIRST, like the chief said !!!! LOVE THE LABRADOR.

Edited by craftsman827

Share this post


Link to post
Share on other sites

thanks everyone, i think the nail has been hit squarely on the head, i have been using the gel as dye/stain, instead of a highlighter, i did wonder why it took so much work to get an even coat ;-), im pleased, its another valuable lesson learned. thank you

Share this post


Link to post
Share on other sites

I find that the antiques and hi-liters can be used for some interesting effect if used as a dye-like colorant (without any undercoats or resists). However, it takes patience and several coats to get something that looks good

What happened here though is more than likely like others have said, because of imperfections in the leather grain causing unintended uneven absorption.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...