Mariusas Report post Posted June 12, 2014 Hello, I want to as your help, I can't find any where to buy new foots for my old sewing machine Pfaff 175. I am sewing handbags and I need smaller foots. Can anybody help my where to find them? I have found a lot of foot in internet but they are different as I understand. My walking foot is oval and all foots on sale in internet are different kind. I have attached my machine. Thank you very much for your help. Best regards, Marius Lithuania, Vilnius Quote Share this post Link to post Share on other sites
shoepatcher Report post Posted June 12, 2014 Your Pfaff post 175 looks like a Pfaff post 195 but with the hook on the left side. The outside presser foot looks like the foot on a Adler 467. This is not the same as the outside foot on a Pfaff 145, 195, 535, 335, etc. I would look at the Adler outside feet. The inner foot looks like regular feet for the 145, 195, 335, etc. and Adler 467, 767 feet. I assume the outer foot is the one you are having trouble with? Could we see a picture of the back of the outside foot? shoepatcher Quote Share this post Link to post Share on other sites
Mariusas Report post Posted June 12, 2014 Hello, I have attached other side of foot. The measurement of first foot holder is 5mm and second bigger foot holder is 7mm but interesting that it is very low. That means you can only remove lower foot without holder ... as you can see on foot is the bolt and then it is removed only lower part removing.. I don't know is it suits adler foots... For real I don't know what type of foot I need. But this foot is not good for me because walking foot is too wide and then I sewing leather bags leather is rises then needle going up.. I don't know how to explain. But I need foot smaller and more holding leather.. Sorry for my bad english Thanks for your help.. Quote Share this post Link to post Share on other sites
shoepatcher Report post Posted June 13, 2014 If I read you correctly, the outside foot is two pieced? Can you remove the outside foot from the round shaft that holds the foot on? if so, get me a picture fo the shaft with the foot removed> shoepatcher Quote Share this post Link to post Share on other sites
Mariusas Report post Posted June 17, 2014 Hello, I have attached 2 photos of foot. I have searched but can't find leg like this.. Quote Share this post Link to post Share on other sites
Mariusas Report post Posted June 19, 2014 Nobody knows where I can find smaller legs for my machine? Quote Share this post Link to post Share on other sites
