Jump to content
wolvenstien

Motorcycle Windshield bag HARDWARE

Recommended Posts

I posted this before the crash.... and wasnt able to get a place to get the hardware, so i am posting again.

I went and bought the Tandy windshield bag kit thinking I would steal the hardware out of the kit.... Low and behold all the hardware is already installed to the leather.... the only thin you need to do to the kit is lace the gussets together.... So... I still need to find a place to get these hardware brackets...

Pix attached are from and old project that I canabalized the brackets from....

windshield_bag_brackets_006.jpg

post-834-1207324910_thumb.jpg

Share this post


Link to post
Share on other sites

I've been finding just about everything in jpcycles catalog. See if these are what you want:

http://www.jpcycles.com/search.aspx?search...g&store=All

Share this post


Link to post
Share on other sites

Why not make your own?

That's what I was gonna say. It looks pretty simple, and you've already got pieces to make your patterns from. Shouldn't be too hard to make your own. It looks pretty thin. I'm thinking some scrap sheet metal and some sheet metal shears would do the trick.

Edited by Bobby hdflame

Share this post


Link to post
Share on other sites

That's what I was gonna say. It looks pretty simple, and you've already got pieces to make your patterns from. Shouldn't be too hard to make your own. It looks pretty thin. I'm thinking some scrap sheet metal and some sheet metal shears would do the trick.

It would be a little tough making the bracket with hand tools since the rectangular portion has to have a rolled "lip" on top and bottom. That is so the bag doesn't hang crooked. Yes, it could be done, but I don't think the end result would look very finished or professional.

Wolvy: PM me. I have some extra brackets. If you only need a couple, I'll sell them to you.

Tim

Share this post


Link to post
Share on other sites

I've been finding just about everything in jpcycles catalog. See if these are what you want:

http://www.jpcycles.com/search.aspx?search...g&store=All

If you buy your brackets, make sure they are the right width to line up with the windshield screws. Not all windshields are the same. You may have to call the vendor because it's not usually listed on the website.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...