Jump to content
Fd3615

Thread, Bobbin, And Other Silly Questions Cobra 4

Recommended Posts

Ok so I just received a new cobra class 4. I am sure I'll have a thousand questions.. But here is a few.

1. Does the bobbin color have to match the thread color.

2. Do u always start a run with a back stitch ? Or if u stitch around the project and overlap is that enough to lock the stitches in.

3. Is there a video or reference that explains all the different plates and walking feet ?

Share this post


Link to post
Share on other sites

1/ No. In fact when you get the machine I suggest you spend a week or two playing with different thickness materials using black and white thread. This will show up tension issues clearly and you will be forced to learn how to set tensions

2/ If you are going around a project then backtacking is not necessary. As you get to the previous stitching you may need to lift the foot to get into the original set of holes but ( and others will disagree) that is only critical on high stress parts of the job

3/ NFI

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...