Rich Dee Report post Posted January 30, 2010 I am making a couple of small solo seats..I will be braiding the bottom and top together..I read in one of the posts that the top half need to be about 3/8 in. larger than the pan. Is 3/8 in about right for the bottom section.. Quote Share this post Link to post Share on other sites
David Report post Posted January 30, 2010 I am making a couple of small solo seats..I will be braiding the bottom and top together..I read in one of the posts that the top half need to be about 3/8 in. larger than the pan. Is 3/8 in about right for the bottom section.. Rich, The top need to be about 3/8" larger than the edge of your padding. The bottom about 3/8" larger than the pan. I hope that helps. Don't go overboard on the thickness of your padding. About 3/4" is the thickest you should use. I've see 1" used on nearly flat pans. Dave Theobald Quote Share this post Link to post Share on other sites
Rich Dee Report post Posted February 1, 2010 Rich, The top need to be about 3/8" larger than the edge of your padding. The bottom about 3/8" larger than the pan. I hope that helps. Don't go overboard on the thickness of your padding. About 3/4" is the thickest you should use. I've see 1" used on nearly flat pans. Dave Theobald Thanks..Thats very helpful.. Quote Share this post Link to post Share on other sites
