Jaymack Report post Posted August 31, 2012 I've used the search engine, but I can't find a post about sharpening a diamond shaped awl blade. Any help on this topic would be appreciated. Thanks, John Quote Share this post Link to post Share on other sites
KAYAK45 Report post Posted August 31, 2012 There is a video on youtube, just search "sharpening an awl" I didn't think much of it, but it's awl I've seen. It'l get you started. It is to the point. (Sorry for the bad puns.) Kevin Quote Share this post Link to post Share on other sites
Jaymack Report post Posted August 31, 2012 Kevin, Thanks for the quick response and I liked your pun! John Quote Share this post Link to post Share on other sites
dirtclod Report post Posted August 31, 2012 I start out on a stone then may go wet dry sand paper and finish by buffing. Buffing wheel with green compund on a grinder works fine if you don't have a buffer. Quote Share this post Link to post Share on other sites
Charliewz Report post Posted August 31, 2012 I've used the search engine, but I can't find a post about sharpening a diamond shaped awl blade. Any help on this topic would be appreciated. Thanks, John I found this on the web a while back. http://www.bowstock.co.uk/saa.html Charlie Quote Share this post Link to post Share on other sites
