Jump to content
Sign in to follow this  
esantoro

washers for 350 Jumbo Rivets from OTB

Recommended Posts

Does anyone know of good source for washers to use in peening or rolling over the #350 Jumbo Rivets from OTB?

I'm running low on my current #L-1125 washers from OTB and am thinking that OTB's price seems a bit high for washers. Furthermore, the .205"-diameter hole in these washers is a bit wide for the .175" post of the jumbo rivet. I'll try the usual places -- Home Depot and Lowes -- but thought I'd ask around to see ifanyone has been in a similar situation and knows of a better and less expensive washer.

Thanks,

Ed

Share this post


Link to post
Share on other sites

I found zinc washers at The Home Depot, but feel that these might rust too easily and stain the leather. Hanson rivets has black-oxide finished steel washers at an inside diameter of .194", a better fit with 3/16" tubular rivet posts. Does anyone foresee a problem with this kind of finish?

Ed

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...