Jump to content

Mungo

Members
  • Content Count

    59
  • Joined

  • Last visited

About Mungo

  • Rank
    Member

Recent Profile Visitors

2,572 profile views
  1. This is my first time using Resolene so I tried it on scrap pieces first.The first piece received straight undiluted resolene and the second I diluted 50/50 with water. The undiluted was definitely too shiny for my taste and the second was less so, but I would like it to be a little less shiny. Can you dilute it even more and get good results? Thanks
  2. I mostly make items using the above mentioned thicknesses. I’m considering getting a more expensive edger than I currently own and want to get one for these sizes right now and maybe add others later on. Thanks
  3. Thanks. I think I’ll go ahead and try it.
  4. I’m making a belt and I’m trying to decide which finish to use, SnoSeal or a clear finish from Tandy. Considering that the belt will be flexed constantly and be subjected to the weather and rough use by a kid I’m wondering which would be best. Any thoughts? Thanks
  5. Has anyone applied a finish over Angelus paint? I have Tandy Professional Finish on hand and trying to decide whether to use the finish or SnoSeal. Thanks
  6. Thanks for the replies. I’ll be using those suggestions in the future.
  7. I tried using wet cotton swabs. It helped a little, but not enough.
  8. Sometimes after I’ve sewn my leather work the threads pick up the dye and appear dirty. Is there a way to clean them to make them nice and white again?
  9. Would anyone happen to have a crossdraw pattern for a right-handed person? Thanks
  10. Thanks for the reply Fred!
  11. I have some extra leather I need to store for maybe a year. I was thinking I might apply neatsfoot oil, let it dry for a couple of days, and then put the pieces in a cardboard box. Would this work?
  12. Mungo

    Stitching groover

    Thank you both! Very helpful.
  13. Can a stitching groover be sharpened or do you just buy a new Grooving blade?
×
×
  • Create New...