Jump to content
JLSleather

Belt Strips N More

Recommended Posts

Cleaning up time around here again. One day, I'll be smarter, and I'll do it BEFORE tax time inventory!

Anyway, I have some 1 1/2" wide strips of Hermann Oak tooling leather in 6/7 and 7/8 oz, along with some other irregular pieces that should get used.

The belt strips are the same leather I use for the belts on the etsy site (link below), which are carved and then lined with either 2/3 or 3/4 oz lining.

I see that SLC sells strips (don't know if they're even H.0.) and the "wholesale" price is $15. This seems extreme to me, since I can buy B-grade backs (no belly leather) and cut my own for more like $10.

Any interest, lemme know what you need and how long - I think most of these strips wil be in the 45-55" range.

I do want to clean out around here, but largely the idea is to boost the 'new guy', so how 'bout we give the newcomer a shot at these. Buy a few, and I'll 'toss in' some 3/4 to line 'em with :)

Oh, I like paypal - but I don't care for ebay, so ....

Share this post


Link to post
Share on other sites

Enough responses to this to post pics under here. There's actually a bit more than this, but this will give a fella the main idea. Tossin' in some 3/4 oz to line straps with, and there'll be a bit o W/C when I trim a couple hides, which goes if a guy kin use it.

Good lookin' leather front and back. Oh -- tha's a 6' ruler and a 24" square ... so ... I flipped 'em over and wrote the length on some ...

post-13153-0-89799300-1425514254_thumb.j

post-13153-0-78471800-1425514310_thumb.j

post-13153-0-82156700-1425514322_thumb.j

Edited by JLSleather

Share this post


Link to post
Share on other sites

Do we order on the Etsy site or let you know here?

Share this post


Link to post
Share on other sites

There's no "ordering" ta do, just a clean up where i thought I could see my space and a fella could git decent leather without a mortgage :)

There is one fella spoke up earlier might want some, let's give 'im a chance to decide if he wants it :)

Share this post


Link to post
Share on other sites

Sounds good but I'd be interested in some if you have any left. It would be a good way for me to try to improve w/o spending a fortune.

Thanks,

Chris

Share this post


Link to post
Share on other sites

I would also be interested in 3 55'

Edited by Ta2ooz

Share this post


Link to post
Share on other sites

That batch is gone, fellas. I'll do some more diggin later this afternoon. ;)

Share this post


Link to post
Share on other sites

Thanks anyways

Share this post


Link to post
Share on other sites

Glad you liked 'em :) Now, how 'bout some pics o them holsters ya was talkin about makin'?

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

×
×
  • Create New...