Jump to content
linstone

What Is This 'braid' Detail And How Is It Done?

Recommended Posts

It looks like a continuous two strap bleed knot/slit braid. The two straps are riveted through each other and the collar at each end. Basically you cut a slit or hole on one strap, feed the tag end of other strap down through and pull snug. Cut a slit or hole in the second strap, feed the tag end from the first up through and pull snug. Hole or slit in the first strap again, down through, and keep on slitting and pulling until you get the length you need. A light tapping with a smooth faced hammer will help to smooth and set the braid once you are done.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...