Jump to content

Recommended Posts

My latest attempt at an avenger style holster and double mag holder. The belt slot on the back turned out a little loose. Should have used a smaller piece to form it. It took me several tries to make the mag holder. I think I can still improve on it. Not sure about the belt clip being riveted on. Think I'll try sewing on belt strips on the next one. As always, all constructive criticism is welcome.

post-37799-0-10387800-1425866042_thumb.j

post-37799-0-48598100-1425866061_thumb.j

post-37799-0-25565100-1425866078_thumb.j

post-37799-0-83940500-1425866098_thumb.j

post-37799-0-17754800-1425866382_thumb.j

Share this post


Link to post
Share on other sites

It looks like the leather itself could be upgraded. As for the belt loop, I like to see them WIDER. I'd move the slot clean to the edge of the pistol.

Share this post


Link to post
Share on other sites

As for the belt loop, I like to see them WIDER. I'd move the slot clean to the edge of the pistol.

Here is my recent experience FWIW. I just built an avenger for my Sig P238. Cute little gun needs a cute little holster, right? Well, there is precious little real estate to work with there. I use a gun belt that is one layer of 15 or 16 oz leather. Thick and pretty stiff. Talk about a pain to get that holster on! Mainly because the slot and belt loop are almost too close. Now, I could not have made them much further apart. But just adding an explanation to the above.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...