Jump to content
Sign in to follow this  
Aurelie

My Saddles ...so Far...

Recommended Posts

Hello,

Just a quick "re" presentation :

I am a 35 years old french girl living in France

I 've been trained to build "basic " and resistant saddles in Montana during 2010 summer

Now i am in France and building saddles on my own

What can i say?

I 've been well trained because i ve got the "basic" process to build a saddle

What i have learnt so far? => you learn something new, you experiment something new every new saddle you build

and you better have a load of crazy ideas in your brain to come through the troubles you can have

and 1 of the big difficulty i have come across? it's about tools

here in europe many tools are different or simply do not exist so you have to have a great idea to turn 1 tool into what you need

It's just a great job! i do not regret having put my fingers in this! ;)

I am a rookie, my saddles are not perfects (and i am the 1st to say so) but i am improving myself everyday

and i keep in mind what my teacher used to say :

Knowledge builds the saddle,

Experience makes the Difference"

and that's so true!!!

even more when i see all the awesome things you do guys with leather and saddles ;)

Ok enough chating around!

Here are the jobs i have done so far ; here in France by myself :

1st one is a Wade tree from Timberline - Inskirt rigging - balanced ride stirrups system (really like that) - saddle for a QH - saddle for going in the "backcountry" - saddle finished on April 2011

what can i say about it aside it was hard to build because i was pregnant and tired?

i came across troubles with the fork cover - i did it 3 times

it was my fault ! i gambled about the leather and knew it would not work...and it did not work

i am not "at ease" with the step where you cut the hole to fit the horn : 1 time is too wide or the other time it's too tight

i tried the option with scallops (i really do not like that , it's not neat) and i tried the option cut at the back and laced (it's better but longer)

the second one:

it's a sid special from Timberline - Inskirt rigging - saddle for a paint x fjord - "backcountry" saddle - saddle finished on october 2011

the welts : i could have done them better but the result is rather good for a whole hand stitching (no sewing machine so far)

i ve come across BIG troubles with the padded seat - i did it twice because of big wrinkles- and after a big brainstorming with hubby...we won!

in fact , the leather i used for the padded seat was an oiled leather, too thick for that BUT we finally won over the "too thick leather" and ZERO WRINCKLES!

i am rather proud of the seat on this saddle because the final result is nice

what i could have done differently? = the back jockeys are a wee too small, they could have come a bit farther underneath the side jockey (duly noted for the next one :P )

the binding : that usually easy peezee thing just drove me crazy......

drill bits are too short here for the thickness of the cheyenne roll so i had to find some tricks to finish nicely the job

It's acceptable but for me the holes of the stitching line could be a wee smaller and it would be perfect

if you put aside the troubles with the padded seat, this one gone better than the 1st...even with a 4 months old baby around ;)

what part i really like on this saddle? the back jockeys !

why? i do not know...they just look fine

i am going to start a new one next week and i will keep in mind all the "errors" i do not want to do again.....just because i know that i will come across "new" troubles!

AhAH! ;)

Next one :

saddle tree : old mexico from Timberline - i think it will be inskirt too - black leather and yellow latigo and padded seat - straight cantle (never done that before = > by the way : i am interested if you can explain how you stitch the binding on a straight cantle because the way i know is just "scaring" me)

post-22438-003533100 1318837034_thumb.jp

post-22438-013007500 1318837788_thumb.jp

post-22438-004444100 1318837800_thumb.jp

Share this post


Link to post
Share on other sites

Looks like nice work, especially for trying to work being pregnant then having a baby to take care of later. Keep up the good work. Are you making the saddles for customers there in France? From what I can see in the small picture, your padded seat on the 2nd saddle looks great.

Share this post


Link to post
Share on other sites

Yes Harrington,

i build them for special orders here in France

and yeah, the padded seat on the 2d saddle looks nice.....

but it really was a "pain in the butt"

because i wanted to use a specific leather and it turned out to be to thick and not stretchy at all...

then when i pulled the seat => 2 huge wrinkles appeared at the base of the cantle

had to tear apart the seat and redo it from scratch

after 1 phone call to the USA and the answer : "Aurelie, it s impossible to do that with this leather"

and given how "hard headed i am" more than a mule if i can say so

i finally found a trick to pull that seat the way i wanted

wew.....not sure i would do it again though!

next saddle , i am going to "try" a straight cantle and a padded seat ...but with a leather more stretchy ;)

and since , it's not a special order, i am going to try to experiment some things and try to improve what i was not happy with those last saddles ;)

Share this post


Link to post
Share on other sites

Not sure this picture is bigger than the others (i did not want them to be too huge for computers)

Not sure you can see the padded seat better...

but here it is

post-22438-093183600 1318879837_thumb.jp

Share this post


Link to post
Share on other sites

clear.jpgCongratulations Aurelie. Much good work

Gianni

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...