Jump to content


Photo

Singer 29K51 Sewing Machine Help


  • Please log in to reply
3 replies to this topic

#1 angelren

angelren

    New Member

  • Members
  • Pip
  • 6 posts

Posted 26 March 2012 - 12:58 PM

Hello,

I have a Singer 29K51 sewing machine. Having loaded the bobbin, installed it in the shuttle, and closed the plate, I am having trouble getting the loop necessary for sewing which is created by the top thread and the bobbin thread. I have looked up pfds of the loading of the bobbin and shuttle and believe that I am doing it correctly. Can anyone give any trouble shooting suggestions? Thank you!

#2 Dave D

Dave D

    New Member

  • Members
  • Pip
  • 3 posts
  • Gender:Male

Posted 27 March 2012 - 08:50 AM

angelren, on some of the older machines, the needle gets threaded from left to right, versus front to back.

#3 Sylvia

Sylvia

    Leatherworker.net Regular

  • Members
  • PipPipPipPip
  • 1,842 posts
  • Gender:Not Telling
  • How did you find leatherworker.net?:Google

Posted 27 March 2012 - 01:07 PM

Did you see this? The machine in this video is threaded left to right. Don't know how much that helps but It's fun to watch :)

A teacher pointed at me with a ruler and said "At the end of this ruler is an idiot." I got detention when I asked "Which end?"

#4 leevalley

leevalley

    New Member

  • Members
  • Pip
  • 5 posts
  • Location:Aetna Alberta
  • Leatherwork Specialty:saddle repairs, shoe repairs, custom work
  • Interested in learning about:all things leather, can never stop learning
  • How did you find leatherworker.net?:good old google

Posted 30 March 2012 - 11:03 PM

angelren these machines are wonderful, when they work but when they don't so frustrating. A few things they do thread left to right as stated also when pulling the bobbin thread bobbin should turn counter clockwise. I know that might sound silly but they don't sew otherwise. Timing is also important so with the cover open watch the needle as it starts to move up, the shuttle point should be at the edge of the needle. timing is adjusted under on the shaft that runs the to gear slides on the shuttle carrier. hope this helps.





Similar Topics Collapse

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users