DavidMillsSaddlery

Another Bull? So you like them so much you’re running two of them?

I realize this is an old thread, but do you have any of these?

I’ve got one.., where are you at? I’m in or near San Antonio Texas

That’s good to hear...

Wow Bob, that looks great!

Who can tell us what Ferdco to their version of the 441 by Juki that makes it different than everybody else’s? I’m interested in buying one, and want to know what they have tweaked… I do believe they’re rated for 7/8” inch sewing thickness, but what else have they done?

The 6/6 uses a 331 needle... like the old Pearson 6! I may have Campbell Randall make a new needle bar to fit the 794 system needles...

since there ain’t much out there about this...

I know this is an old thread, but I’ve got this machine now as well! (Not his) but one like it! there are three places top tension can be adjusted... 1 far right coming off the spool. 2 the second or middle disk that thread loops around... 3 is on the needle bar just above the left of the needle... where the thread runs through the flat bar... stitch length is adjusted by the big black knob, then needs to be set and locked in the back with the bolt that bumps up to it! as far as your stitching, this machine isn’t set up for the intricate turns you’re making! I’d suggest a compound feed walking foot to do the tooled leather... I use a 153w103. if you’ve ever seen the movie “8 Seconds” you’ll see my name in the credits as one of the chap makers... David Mills

I’ll take it… I’m down in San Antonio and Jo New can come pick it up Check your messages…

Looking for photos of embosser dies! 210-831-8764 davidmills442@icloud.com

It’s on eBay now...

Great topic!

Thank you gentlemen! Where’d you find that roller foot?

Buy local, support local business... it may cost a bit more up front, but you’ll save in the long run!

They must have gone up after the Texas show?

Where’s your YouTube channel? I just bought one of these... I may have screwed up by just buying the head, and not having the table shipped? Tell me about this exhaust system!

If you do decide to part out, I’d like dibs on the Luberto stitcher and Randal splitter... as per our phone call I won’t get back home till mid week with my truck driving... still interested in the lot... just need to check with the bank! David Mills 210-831-8764

Not sure, but they’re probably including the shipping and other tariffs in that price?

Spring to apply pressure to presser feet is missing...

From here.... I tried to cut all but what you said about these.... I love mine... was what I was trying to say

How much?

Polyester is ok to use, but no nylon...

Only photo small enough!