-
Content Count
148 -
Joined
-
Last visited
Posts posted by blue62
-
-
The single loop holster is a crossdraw, the design works out better with only one loop.
-
On 3/29/2022 at 9:46 AM, PastorBob said:That is a beautiful rig. I am not familiar with Cowboy shooting...are you limited to 10 rounds (6 in revolver + 4 in loop?) . If so, makes sense there are only 4 loops. Is there another reason for only 4? @blue62
There are only 4 loops because they are for spare cartridges, otherwise a belt full of loops looks pretty cool, but it gets mighty heavy when they are full.
-
I would just make him a crossdraw, in the amount of time it takes to modify and make it look decent you can build a better looking one from scratch.
-
-
-
Thanks for the positive comments!
-
Frodo, one of the things I do to get parallel to the edge stitch lines is to use a groover, even when machine sewing, it gives you a path to follow so you dont have to rely on a edge guide.
-
-
Sold
-
On 9/23/2021 at 6:27 AM, Dieguy said:We are looking for an additional one of these to add to our Mfg. Please let me know if its still available. Steve 330-439-8966
Yes its still avalible
-
Thank you, that is what i wanted to know.
-
Can anyone tell me if the table attachment is easily installed and removed on tbe class 26 cobra and similar machines?
-
-
Btt
-
Still available
-
Looks pretty good other than the rear housing is shifted to the left of center.
Overall nice job.
-
Nice seat, but definitely not a shovelhead.
-
Still available
-
-
-
On 11/12/2020 at 11:14 AM, 1961Mike said:Hi Blue62
Nice job. How did you get the neatsfoot oil so even? I just did a belt with edge stamping instead of a stamped center and clear edge. The stamps held a lot more oil than the clear areas. In my case it won't matter because I'm putting on a coat of Skidmore's or two next.
Thanks
Mike
Light coats, keep the oil warm, and one of the bigger things, if your leather is on the softer side it will take oil faster, any kind of stamping will also take oil quicker, so light coats and set someplace warm to let the oil even out.
-
-
-
Tech Sew Tek Sew Leather Skiver SK-4 - Antioch Illinois
in Old/Sold
Posted · Report reply
Still available?