thunter9

not going very fast but winters here

after i get the one end peened to as large as i want about 1/2 inch , got a ways to go. as for the cane tip i'll go with a cane rubber tip over the peened end. want it to grip not slide around. the antique one i found is just the peened end. just want to protect the floor. i've thought i'd chuck it up in a lathe to sand it down , but thought better of it for cheating. want it all by hand the old one i have is probably rusted and that's why its so flexible .i've been kicking this around for years and thought it was time.

i've started peening and i have some 14oz skirting get it wet and start punching holes

i picked up at auction few years back , a leather cane. its way to flexible to be useful . i thought of making one so i got a pc. of steel rod 3/8 dia. and so long. i'm in the process of peening the one end to about the size of a washer. then i'll drop the washer down the shaft ,flatten it some and start punching circles withe a 3/8 inch hole. glue all those layers together and a washer and peen that. then i'll try and find a belt sander to shape this thing. has any one ever tried this???????????????????????????

hide house is one try waterhouse leather maverick leather all is on line

have been wondering if anyone has tried making a phone holster to carry on your belt? something that you can drop the phone in and make it easy to remove. also should be deep enough so you don't lose it. my thoughts are ,is there a generic size that should work with most phones . i'm thinking smart phones rather than flip type

a ANY ONE OLD ENOUGH TO REMEMBER THIS THEY SOLD A SHEEP SKIN COAT PATTERN ALSO THINK I HAVE THIS ALSO

this was offered in the early 80's i think maybe the 70's org article 62 out of print 73 this is a full size pattern

what is with this ????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? i wrote the description 4 time and none of it took such BS

you just don't want it dripping wet more like if tour going to tool leather . keep in mind the the presser foot will leave its impression

full size never used

in 1962 the craftsman mag. published an article by jerry killinger on how this was done . and them al came out with a how to book later . some where around 73 the reprint of original was out of print. i think at some point they reissued the pattern in full size i got it and never used it

wow i think i still have your PH when we talked last year

i've most of anything other than a sole stitcher and a splitter and any picking irons 100 plus old craftaid stamps and 30 plus craftaid stencils adler 30-70 with stand cowboy 4500 singer 111w155 with K leg table drive punches round and some belt end and slot round knife rose and newark nj osborne 3 3/4 , and 4 1/8 and other skiving knives 5 and 1 twist handle belt cutter brass old shoe last and stand several different size lasts books hardware leather rein rounder osborn rawhide mallet and the list goes on hand tool by gomph and osborne this is a decision i've been putting off for some time. if someones looking for something i just might have one. you'll ask how i plan to sell this ? i don't think someones going to offer me what i feel i need for all of this. so i will break up if you what and can afford . i'm located in central iowa . why to much to ship at this end for me

i've most of anything other than a sole stitcher and a splitter and any picking irons 100 plus old craftaid stamps and 30 plus craftaid stencils adler 30-70 with stand cowboy 4500 singer 111w155 with K leg table drive punches round and some belt end and slot round knife rose and newark nj osborne 3 3/4 , and 4 1/8 and other skiving knives 5 and 1 twist handle belt cutter brass old shoe last and stand several different size lasts books hardware leather rein rounder osborn rawhide mallet and the list goes on hand tool by gomph and osborne this is a decision i've been putting off for some time. if someones looking for something i just might have one. you'll ask how i plan to sell this ? i don't think someones going to offer me what i feel i need for all of this. so i will break up if you what and can afford . i'm located in central iowa . why to much to ship at this end for me

$800 i had an adapter so you can add a chuck on the end

http://www.tolindsewmach.com/thread-chart.html this should tell you somethiing

i have a mini pro

you ever find your round knife i have 2 a rose from phil 120 c.s. osb 1826 newark 100 sharp around 4 inches wide i'll find out if you really want one

i had a new timing belt replaced ,old one had a chunk missing. and since it sat for a time had it gone through and oiled and adjusted. it will come with a clutch motor an table w/ bobbin winder and a light and also a after market thread tree. i've set this up to sew 138 thread and it does a great job. should sew chaps and wallets till the cows com home.only reason i'm selling is i've had to move a don't have the room. so if you have the money or you think you have something you think i need let me know. asking $500.00 and i could use a few french end driver punches or a portable machine that will sew canvas weight. i'm located in central iowa and might meet you half way. this is all contingent on where your at. the machine head is in side and the table is in storage like i need to say what it is singer 111w155 compound feed no reverse

you find one

check with Ralph's industrial sewing machine in denver

radon leather Michigan carry full hides

you would be better off if you would post what it is