Utilatu00

Hello $$hobby.MO sent in yellow envelope today at 1:30PM ET.Should get it by end of week if weather permitted!!.If you have Paypal it would be much faster(instantly).Thanks for listing(I will accept a spare ponyfor the ride if you chose..!!LOL)

Hi.Im first.Please let me know how to buy them.Thanks

Hello.Just Email you the offer.Thanks

Thanks koreric75/ SaddleBags for the info.Was thinking of mix 2% denature alcohol(by someone in the know.) but not sure it will change the glue formula.

Hi.Barge All purpose Cement, a bit dry out(jelly like instead of liquid).Any tip to dilute it without affecting the chemical character of it?.Thanks in advance

Hi.Newbie.Mistakingly overpaid for Horween(45$/sq.ft. 9-11 oz. veg.tan).Have cut out size 11" x 9" pcs.(Intended for a crossbody bag but look for better use if possible.Already make a dozen bag all size/shape with different trial technic learn here/Youtube /etc..)Will be tool and dye if needed.Thanks for your time//wisdom in advance.

I bought lots of scrap Lot on Ebay for my small project.Usually sold by 10 lbs lot from 1.5$ - 10$ per pound with option of plus or free ship.Just a suggestion.Try it here first.Good luck

Hi.Sorry ,have to delay this.Moving soon..gruhh!!.Thanks for reply.

Hi.Would like to know 10lbs to zip 20164 how much it cost.Use PayPal if alright.Thanks

Hi.link: https://www.ebay.com/itm/332516170309?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l264. Sorry,did NOT know how.rely on someone else do that for me.Hope it helps.Thanks for looking

Put up everything for SAle on Ebay if anyone interested(Ebay ID: ssguest00).Thanks

Hi.Thanks Bolt Vanderhuge for the extremely helpful info.

Hello.Newbie here.Anyone has source for above(only needs cap,(the buttonlike part of 4 pieces).Plenty supplier that has full set but not cap or deco cap that out of my budget for 300pcs..Thanks in advance.

Hi.ALL.Thanks for any guidance.In my situation,do not think it resolved(Making curved cigarette lighter pouch.Outside is masked with even stiches then cross-over to inside holes but do not like the pull).Always,learn something new in here.Take care

Hi,all.Newbie doing a lot of small projecst.My question:On wallet/folding item.Outer piece is longer(more punch holes..exp..25 hole outside to sew to 23 holes inside piece..) is how to NOT skip/double sewn when match togetther?Hope someone here give out the wisdom.Thanks for your time either way.