Shalako1873
-
Content Count
6 -
Joined
-
Last visited
-
Hi Guys, Just thought I would fire this out there. Thinking about an embosser machine. Which is the best machine to invest in. Also is it worth doing. Any information would be great. Thanks Steve
-
Hi, This was an old enquiry. after posting I checked my information. The barrel is 28"long, as in previous post. I then contacted the guy who wanted it made and he is still on fence. I appreciate you coming back to me. Thank you very much.
-
I think it was 32" long. Thank you for your help with this. Yes it will need an end cap. The riffle will saddle mounted on the right with the butt to the rear. I haven't got back to the guy yet as I said I needed to source information first. But I really appreciate your help. What you offered sounds great. Many Thanks Steve
-
Hi, Cant get my hands on the rifle. I was hoping to work that way. This was why hoped for an exact pattern. Thank you all for a great response .
-
Hi Thanks for the information I will check them out. I'm sure it will straight forward enough to adapt the patterns. Many Thanks Steve
-
Hi, Can anyone tell me where I can get a pattern for a 1876 lever action, with a 28" barrel. I believe this is a 44-60 Bicentennial Limited Edition. Any advice would be welcome. This is my first post, so many thanks. Steve
-
Hi, I'm a new member and looking forward to speaking to other members. I originally had problems signing up and did not realise my account had been fixed. Not sure how this all works. But here goes. :-)
Steve
