Jump to content

PAMuzzle

Members
  • Content Count

    119
  • Joined

  • Last visited

Everything posted by PAMuzzle

  1. Bianchi shoulder holster # X-2100 “PHANTOM” My brother-in-law brought this over to see if I might be able to fix it. It seems the long rods are twisted. Does anyone have one or know how it is assembled and how to repair it? TIA.
  2. Thanks all. I don’t want to drill through for rivets. I will try to get a piece of polypropylene and try gluing.
  3. My brother bought these boxes for his grandkids. He wants me to glue VegTan leather name tags on the tops. Boxes are polypropylene. What would be best glue for this. I use Barge for most of my gluing. Thanks.
  4. Dwight, Do you have any problems with dye rub off? What finish on the backside? Do you ever leave it rough or line the back? Do you special mix Pro dyes for different colors?
  5. Ok. Thanks guys. Good to know. The belts are extra long so I can test a small bit at the end.
  6. Diesel….It is not a lined belt (10/11 oz). I am going to use Tokonole or gum trag to smooth out the flesh side, tape pulled it rough. i tried the blue tape, didn’t work. Maybe I’ll get a new roll of strong packaging tape and try that to remove the residue. While I’m there I’ll pick up a new roll of Blue Tape. Fredk…don’t think any finish would adhere to the WD40 ??? But I don’t know for sure.
  7. I made 2 dress belts with hand stamped designs. I covered the flesh side with blue painters tape. I became ill after finishing the stamping and left the tape on for a week or so. After pulling the tape, it left adhesive residue. What would you recommend as the easiest way to remove the adhesive? Thanks
  8. A friend of mine wants me to make southwestern style stamped belts for his son and his wife. They live in AZ and it will be a surprise for them both. What would be a standard width for a lady's belt? 1 1/4" or 1 1/2" Men's is usually 1 1/2"
  9. Bruce. Could you please check on those stamps and give me an idea of price? Appreciate your help.
  10. Has anyone have any idea what these 2 stamps are? Brand and model # The diagonal lines are a pine needle stamp? which I have Friend wants me to make a couple items to match his older holster (unknown maker) Thanks for any help.
  11. Must be vegtan…poured boiling water on it and it took a little while but it started curling. Took another piece and burned it. Rubbed ashes on white paper they were brown no green.
  12. I received a couple pieces of tannery dyed 8/9 oz leather. How can I tell what type type if leather it is? Veg tan, chrome tan, etc? Got it from someone else and he doesn’t know what it is or where he got it. it seems like veg tan but has a waxy feel. Barge contact cement peeled off. Water runs off but it feels damp and penetrated 1/4 on cut edge. I was able to hammer fold it like for a case.
  13. Thanks. I edited my post to remove the vegetable oil. I forgot about it turning rancid. I use EVOO when I use oil or Pure Neatsfoot Oil if I want the leather to get darker.
  14. Nice work...I see you are using a rubber/plastic shield on your stitcher, great idea to prevent marks!
  15. Olive oil. I use Extra Virgin Olive Oil according to Chuck Burrows and Will Ghormley and a few others. ArkieNewbie: Springfield Leather sells Hermann Oak precuts: https://www.springfieldleather.com/Hermann-Oak-Grade-1-Pre-Cuts?quantity=1&pre-cut=3
  16. Doc Reaper and Tugadude… would you recommend Hardwood stump or soft wood like Doug Fir?
  17. Yeah it is. Puckered a little but I did not change tension from my leather settings. Did not pull material into machine.
  18. I bought the same plate/feed dog and was able to sew 2 layers of t-shirt material with #277 thread. It was a test and that was the smallest thread I have.
  19. Thanks all. May go with the 4x4’s. Lowe’s has untreated Douglas Fir 4x4x8 posts
  20. Scoutmom103…this I know, my hammer is nylon and hard rubber.
  21. Thanks guys. I think I will build a wood post on the floor and use granite and top with a couple layers of thick leather. I have a 2 lb hammer that I will try. If that doesn’t work, I’ll go to Lowe’s for a 8 lb steel sledge…what could it hurt? LOL
×
×
  • Create New...