Bromanjr

I have a juki ls 1341 cylinder bed sewing machine. Is there much difference in the 135x17 (standard for the machine) and the 135x16 needle system?

I’m in alabama. I’ll check them out and see about getting some samples and doing some test runs. Thank you all!

Well not a vendor so to say but a source out for the patches being sewed onto hats. That is my goal. To laser engrave and cut patches and then sew them onto hats. The source won’t tell me where he orders his leather from so I thought I’d reach out to other people. And it doesn’t necessarily have to be that exact. I can offer my own color scheme I guess.

Hello so I have an epilog laser engraver and I’m looking at engraving leather patches. Looking at 1.3-1.6 mm thick. The colors listed below were what a vendor told me. starting from the left to right Natural leather, undyed Tan English bridle tan english bridle chestnut any suggestions on where I can find leather like this maybe?

Hello so I have an epilog laser engraver and I’m looking at engraving leather patches. Looking at 1.3-1.6 mm thick. The colors listed below were what a vendor told me. starting from the left to right Natural leather, undyed Tan English bridle tan english bridle chestnut any suggestions on where I can find leather like this maybe?