Search the Community
Showing results for tags 'thread problem'.
Found 2 results
-
thread problem PolyArt 20 thread issues on Pfaff 545
Farmfield posted a topic in Leather Sewing Machines
So I got 10 unused spools of PolyArt 20 thread with a machine I bought, perfect colors for what I do, but for some reason I just can't get it to work with my Pfaff 545 - I get these weird kinks... I've tested this thread with a Durkopp 239, A Juki 562 and a Singer 111G156, and it works without problems on all of them, no problem getting great stitches. And this Pfaff 545 works perfectly with all thread I tested accept this PolyArt thread. So I tested a bunch of needle sizes, I've gone through the whole range of bottom and top tension, I played with the hook timing, I played with the needle position, I played with the bobbin case opener timing, I deburred the slot in the needle plate, it feels like I tried everything, but I just can't get good stitches with the PolyArt thread on the 545... It's driving me nuts - I just can't understand why it works in the other triple feed machines with horizontal bobbin but not with my Pfaff... And yeah, the top tension is a bit to high in the picture, but even with balanced or too low top tension, overall too low or too high tension, I still get these kinks in the thread... span widgetspan widget -
Hello Everyone! I have a Juki DSC-246 and I have a little problem with it. I made a video about it, so if you check it out and know the solution please write it to me! Thank you very much! Niki
- 5 replies
-
- thread problem
- juki dsc246
- (and 3 more)