JonesCoLeatherworks Report post Posted July 19, 2022 (edited) Just got this machine Friday and it has been one problem after another. I have learned more about industrial sewing machine in the last 72 hours. Scarf/hook way off, needle bar adjustments, tension adjustments, 5 broken needles and a lot of curse words. Now this, which I can not find the answer how to fix. Called Techsew support-seems useless. Can't talk to anybody about the issue. I went through a lot of threads here, but haven't found any with my particular issue. Thanks Troy Edited July 19, 2022 by Northmount Uploaded photo Quote Share this post Link to post Share on other sites
Northmount Report post Posted July 19, 2022 @JonesCoLeatherworks Please post your photos here. Hosting on another site often results in the photos disappearing due to changes in permissions, files moved or deleted. Then the thread become useless. Also many members that could help you will not go to unknown sites. My security even complained about your site. @Techsew Ron Looks like he could use some support. Quote Share this post Link to post Share on other sites
Wizcrafts Report post Posted July 19, 2022 @JonesCoLeatherworks What model is your Techsew? It must be a clone of some major machine for which there will be an adjusters' manual. Quote Share this post Link to post Share on other sites
Northmount Report post Posted July 20, 2022 9 hours ago, Wizcrafts said: What model is your Techsew? 2750 was at the host page. Should have copied it too! Quote Share this post Link to post Share on other sites
Wizcrafts Report post Posted July 20, 2022 3 hours ago, Northmount said: 2750 was at the host page. Should have copied it too! If the 2750 is similar to my Techsew 2700, it is based upon the Consew 227R. Below is a manual for the Consew 227R, which includes a plate showing how to time the feed dog. Here is a link to Techsew's YouTube videos pertaining to adjusting the TS-2750 machine. CB227R_Oper.Manual_print_pages_3-13.pdf Quote Share this post Link to post Share on other sites
kgg Report post Posted July 20, 2022 On 7/19/2022 at 1:42 AM, JonesCoLeatherworks said: Now this, which I can not find the answer how to fix. Called Techsew support-seems useless. Can't talk to anybody about the issue. I went through a lot of threads here, but haven't found any with my particular issue. The Techsew 2750 is a clone of the older Juki LS-341 machine. The following link is to the page which shows "Adjusting the relationship between the feed dog and the needle bar" at the every bottom of the page. https://www.manualslib.com/manual/917750/Juki-Ls-341n.html?page=10#manual kgg Quote Share this post Link to post Share on other sites
Techsew Ron Report post Posted July 20, 2022 Hi Troy I see that you left a message with us then spoke with one of our technicians yesterday and confirmed all was ok. Please reach out to us directly if you have any other questions and we'll be happy to help. Ron Quote Share this post Link to post Share on other sites
JonesCoLeatherworks Report post Posted July 21, 2022 Great advice all. Thank you for the input and resources. Yes, Ron, I was contacted by you all as well. Northmount, I did try to insert through the tab, but would not take the photo. Perhaps there a certain formats that are only allowed. I will work on that. I did get the issue fixed, but I never owning a sewing machine could be so complicated. Great to be a noobie to the sewing community. Quote Share this post Link to post Share on other sites
