Jump to content
FrenchMich

Floral scrolling step by step

Recommended Posts

Hello,

My work of this weekend. A pair of yokes for reining chaps

413836492_1(3).thumb.jpg.83d2b52f34a7ee12adc2e0735b71dbe1.jpg

After drawing, the swivel work

1421994265_2(3).thumb.jpg.a478f8e3b4723ced65c9de8f140cb3ef.jpg

External beveling with border

 

 

Share this post


Link to post
Share on other sites

1618238618_3(2).thumb.jpg.e7d256b4001e9525a562e14ee3da4fc8.jpg

The veiner in scrolls

614731496_4(2).thumb.jpg.b3463bdfc42b0c0e0889b0bd9c673f6e.jpg

I began by the concave beveling

 

Next

 

Share this post


Link to post
Share on other sites

Sorry impossible to go on..I can't uplode other pictures.

Share this post


Link to post
Share on other sites

That was great.  Was that from a pattern you made?

Share this post


Link to post
Share on other sites

Looking really good

Thanks for taking the time to post clear pictures like this to show the progress and in what sequence the tooling is done. I alwyas get too carried away, so even with my best intentions, I rarely manage to take other than a start and a finsihed picture.

I am anxious to se what the yokes will look like completed. Hope you manage to find out how to upload the remaining pictures.

 

Share this post


Link to post
Share on other sites
3 hours ago, FrenchMich said:

Sorry impossible to go on..I can't uplode other pictures.

You need to reduce file sizes.  1280 x 768 pixels or there abouts is adequate for photos as the screen resolution on most computers is typically less than 100 dpi.  See this post for helps and suggestions.

Share this post


Link to post
Share on other sites

93382285_5(2)(Copier).thumb.jpg.218eb45d1f013ce4bdab817edb2a1561.jpg

Next convex bevelling

3840258_6(2)(Copier).thumb.jpg.651eecf18f7e3b712ea058a6a7b8e8df.jpg

Next background, with Barry King 0.45 Bargrounders

1332993414_7(2)(Copier).thumb.jpg.55b024652fb83b5cce72cc15f5fa675e.jpg

Next some details with veiners

 

Share this post


Link to post
Share on other sites

as you advised me, I resized all my pictures, but  i am stuck again

Share this post


Link to post
Share on other sites
On 9/4/2022 at 10:14 PM, sbrownn said:

That was great.  Was that from a pattern you made?

Yes of course

 

On 9/5/2022 at 1:25 AM, Mulesaw said:

Looking really good

Thanks for taking the time to post clear pictures like this to show the progress and in what sequence the tooling is done. I alwyas get too carried away, so even with my best intentions, I rarely manage to take other than a start and a finsihed picture.

I am anxious to se what the yokes will look like completed. Hope you manage to find out how to upload the remaining pictures.

 

As soon I can I'll post the following.

I you want know more about used tools or otherthing, don't hesitate

Mich'

 

Edited by FrenchMich
tell more

Share this post


Link to post
Share on other sites
16 hours ago, FrenchMich said:

as you advised me, I resized all my pictures, but  i am stuck again

I checked your file sizes and don't see any problem, even with the first ones you uploaded.  Maybe something on your end with your browser or your ISP?  Sorry I can't test as there is no limit on the size of moderators' uploads.  If you have more to post and can't get through, message me and I'll give you an address to email them to, and I will post them for you with your comments.

Share this post


Link to post
Share on other sites

 

For previous picture the used tools are Veiner and shader...

202118057_8(2)(Copier).thumb.jpg.7ed2b5cb19c346a5fcb074ea0b6f15ac.jpg

some finish with swivel knife

966967648_9(2)(Copier).thumb.jpg.957c2a078faf780ffe7eeebeabe0740d.jpg

And to finish, the lifter

 

Edited by FrenchMich

Share this post


Link to post
Share on other sites

Today I was able to upload two pictures no more... I'll try tomorrow again

Edited by FrenchMich

Share this post


Link to post
Share on other sites

2102752647_11(Copier).thumb.jpg.99884dac1883cafb90f706576478fd84.jpg

Detail

1328409100_13(Copier).thumb.jpg.a8dcc047c176593b1df2329da864a32f.jpg

With Antique finish

(When I come back the next day it works (for upload pictures...))

Share this post


Link to post
Share on other sites

Thank you for the close up picture.  It really helped me alot to see the details.   Great work.

Share this post


Link to post
Share on other sites

Great step by step progression, and nice use of the bar-grounder tool. Excellent work.

Share this post


Link to post
Share on other sites

Beautiful work!  I want to see the chaps when finished.

Share this post


Link to post
Share on other sites

Share this post


Link to post
Share on other sites

Work of art!  Thanks for sharing.

Share this post


Link to post
Share on other sites

Thank you TomE

Share this post


Link to post
Share on other sites

Excellent.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...