Kovac Report post Posted October 27, 2022 Hello, I got a bunch of these spring clips, but they dont have a rivet hole. Can I use them for sheaths? I cant figure out how to secure them in leather properly. Thanks Quote Share this post Link to post Share on other sites
Tugadude Report post Posted October 27, 2022 (edited) I used something similar and ended up just using contact cement to anchor it and it is doing just fine. It was sandwiched in between two layers of leather. I would say it depends on what you intend to use it for. If a money clip, no problem. If you are going to use it to clip something extremely heavy to a belt, then maybe that's another story. Either drill a hole and use a fastener or maybe you can use the round part at the top of the cutout. But you'd need something with a reasonably large head to do any good. Edited October 27, 2022 by Tugadude Quote Share this post Link to post Share on other sites
DaveP Report post Posted October 27, 2022 If using for a sheath I would drill a hole in the back for a rivet. Just put a thin board in between when drilling. Even a couple layers of cardboard would be fine. Just don't push to hard when close to being through. Quote Share this post Link to post Share on other sites
