FONTENOT Report post Posted January 14, 2009 Hello ,I'm brand new here and i need some help getting the plans are dimensions of a hydralic Draw down stand Quote Share this post Link to post Share on other sites
tonyc1 Report post Posted January 14, 2009 Buy one, pull it apart and measure it all and build one. Dead easy! Just joking of course!!! Tony. Quote Share this post Link to post Share on other sites
bruce johnson Report post Posted January 14, 2009 Fontenot, I've got one of Ron's and of the two madeup ones being sold on any scale, his is way above the other. If you are set on making one, I'd study his for a few things. The way the drawdown works independently of the base is key. You don't change tensions by raising or lowering the stand to get the height you need. You can pivot it around and not have to pick up the whole stand to do it. The part the tree sits into holds the tree pretty well. It is not just a flat board covered with neoprene. His is substantial enough to stay in place. I think his site lists the top and bottom range of travel. Here's a link to his site - Ron's Drawdown Stand. Quote Share this post Link to post Share on other sites
kfiretwo Report post Posted February 5, 2009 Hello ,I'm brand new here and i need some help getting the plans are dimensions of a hydralic Draw down stand the base is just a barber chair base, check around ur local hair salons or on ebay Quote Share this post Link to post Share on other sites
