kZook Report post Posted November 12, 2022 I came across an Adler 767-fa-373 for sale at a decent price (I think anyway) I tried looking up some info on this machine and found very little in regards to using on leather. I currently have a Tecsew t111-155 ( Singer clone ) that I use and like using 96 & 138 thread. Would this be just as capable? I also have a Boss for the thicker stuff so I like my flatbed for certain things. Quote Share this post Link to post Share on other sites
shoepatcher Report post Posted November 12, 2022 The 767-FA-373 was Durkopp Adler's top medium duty flat bed walking foot machine until they came out with the 867. Both were the best machine made in their class. Not cheap new. The one you are looking at has thread trimmers and probably most of the toys, i.e. auto foot lift, back tack speed control, high lift knee pedal, etc. I have a 767-FA-573 which is the XXL bobbin. Great machine. Smooth as hell. more powerful than the Tecsew. You need air to run the functions unless it has been stripped. Very smooth. 1/2" lift under the foot minimum. Max. stitch length is 6-10mm depending on its age. Let's see pics if we can. glenn Quote Share this post Link to post Share on other sites
kZook Report post Posted November 12, 2022 So for $500 it’s probably a good deal? Quote Share this post Link to post Share on other sites
shoepatcher Report post Posted November 13, 2022 (edited) yes A white one which is the later model. Is it motor single phase 220 or 3 phase? It has all the toys!! glenn Edited November 13, 2022 by shoepatcher Quote Share this post Link to post Share on other sites
kZook Report post Posted November 14, 2022 14 hours ago, shoepatcher said: yes A white one which is the later model. Is it motor single phase 220 or 3 phase? It has all the toys!! glenn 120v and also uses air to operate. Not a problem as I already have a compressor in the same area. Think I will go for it. Hey at that price I don’t think it’s a bad investment. Quote Share this post Link to post Share on other sites
shoepatcher Report post Posted November 14, 2022 great price. Efka did not manufacture to many 110/120 volt motors. glenn Quote Share this post Link to post Share on other sites
kZook Report post Posted November 29, 2022 On 11/14/2022 at 11:35 AM, shoepatcher said: great price. Efka did not manufacture to many 110/120 volt motors. glenn So I purchased this unit. Unfortunately I ended up breaking one of the oil lines underneath while trying to move the unit. Where is a good place to get parts for these machines. They all seem very stiff and brittle. Maybe I should just replace them all? Quote Share this post Link to post Share on other sites
shoepatcher Report post Posted November 29, 2022 I would. They are the same type of line these you for air connections. You could also order it from Durkopp Adler which will cost more. Download the manuals from the Adler site. glenn Quote Share this post Link to post Share on other sites
