Joshpickering Report post Posted Wednesday at 03:54 AM I have recently bought a used Highlead Gc22618-1b cylinder arm sewing machine, and am hoping someone here might be able to help. The inner needle foot pressure is much too high, and I can't figure out how to adjust it. The foot pressure thumb screw adjusts the outer foot, but doesn't change the needle foot. I've taken covers off to try work it out but can't find anything. The second issue is to do with the oil wicks in the area above the feet. One is broken and is wrapped around a shaft, so I have no idea where it's supposed to go from and to... Does anyone have any advice on how to replace a wick without knowing where it was? Sorry, I realise this is very vague. Thanks Josh Quote Share this post Link to post Share on other sites
