Moderator Wizcrafts Posted January 2, 2010 Moderator Report Posted January 2, 2010 I recently bought a flatbed Adler 204-374, which sews an honest 3/4" thick belt leather, with #277 thread in a #200 needle (as currently setup). It can be altered to use up to a #250 needle and #346 nylon thread. I am willing to trade for a cylinder arm stitcher, or needle and awl harness stitcher, like a Union Lockstitch machine. I am located in Flint Michigan, so the trade would have to be made within a one state radius, unless you are prepared to drive here. I am not available to travel on Wednesdays or weekends. Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Moderator Wizcrafts Posted January 14, 2010 Author Moderator Report Posted January 14, 2010 A trade for a ULS machine has been arranged. See my post looking for spare parts, needles, awls, bobbins, springs, etc, in the Leather Sewing Machines section of the forum. Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Recommended Posts