AgronZoti Report post Posted March 31, 2010 A galley Director from England stumbled upon our shop in Copenhagen and liked the key rings but was not keen on the black/red color combo i normaly make this in. Therefore, he commissioned them in bright colors… Orange, Lavender, Green, bright pink. I’m really exited to have my work in an other country. Quote Share this post Link to post Share on other sites
abn Report post Posted March 31, 2010 Congratulations! I really like the sleek, modern design. Plus, the pastel colors complement the overall look. Quote Share this post Link to post Share on other sites
bentley Report post Posted March 31, 2010 Very nice work, may I ask where you got the hardware from? Quote Share this post Link to post Share on other sites
AgronZoti Report post Posted April 1, 2010 Congratulations! I really like the sleek, modern design. Plus, the pastel colors complement the overall look. Thank you abn Very nice work, may I ask where you got the hardware from? They are from a shop here in denmark, they have a web shop and they ship everywere i belive. they are around $ 3,00 http://www.skindhuset.dk/default.asp?Action=Details&Item=865 Quote Share this post Link to post Share on other sites
particle Report post Posted April 1, 2010 Very sleek looking! Nicely done. Can I ask how you adhere the backing? Is it simply contact cement? I ask because it seems like it'd be tedious to get right around the edges of the holes to insure a good bond, but you've obviously found a way! Can we see some pics of the backs? Quote Share this post Link to post Share on other sites
AgronZoti Report post Posted April 1, 2010 (edited) Very sleek looking! Nicely done. Can I ask how you adhere the backing? Is it simply contact cement? I ask because it seems like it'd be tedious to get right around the edges of the holes to insure a good bond, but you've obviously found a way! Can we see some pics of the backs? I haven't taken pics of the backs... The leather part is really simple it's a 3 layer sandwich 2 layers veg tan leather. One layer is 1 mm. the other 3 mm. you simply make a random pattern of holes in the 1 mm layer. They layer in the middle is thin goat skives colored with dye or acrylic leather color. If you use acrylic color try and only color the center part so that it does not have color at the edge this might give you trouble when polishing the edges. I also like to polish the holes I cut out. You can do this by using a round piece of wood. I have a cheap artist brush that has a really thin handle at one end and gradually gets thicker. Works like a charm and is fast and easy. The best way is to cut the 1 mm. to the shape you want then leave the 2 other layers a bit bigger. Then you just glue it together with a really strong glue. I use the kind shoemakers use for soles. Then trim it, bevel the edge and polish. The hardware has 2 holes in the back with 2 small screws. You will need to insert the leather mark the holes then take out and use a round awl to make holes. Because the screws are to small and will not handle to force needed to crew them thru the leather without pilot holes. I hope I answered you question Edited April 1, 2010 by AgronZoti Quote Share this post Link to post Share on other sites
TomSwede Report post Posted April 2, 2010 Very godlooking keyfobs, clean and elegant!! Black and red looks best!! Tom Quote Share this post Link to post Share on other sites
Sasquatch Report post Posted April 2, 2010 Nice clean simple look but impressive. I really like these, going to have to order up some of that hardware. Quote Share this post Link to post Share on other sites