Members Gamekeeper Posted February 20, 2011 Members Report Posted February 20, 2011 Hi Everyone, I was wondering if anyone runs a Seiko TH series machine? I have a problem with mine at the moment - it's stripping the top thread!! This has only started since I tried some proper leather needles, unfortunately they were too small & I ended up reverting back to my original needles, now it's stripping all the time. So far, I have checked needle bar setting, & also noticed that the shuttle hook is catching the thread half way through it if that makes sense (this is causing the stripping). I have adjusted the bobbin carrier right up to the max so that it just passes the needle. Now I'm stumped. Anyone got nay ideas? Dave P.S. Unfortunately I don't have a manual for it. Quote
Members Gamekeeper Posted March 5, 2011 Author Members Report Posted March 5, 2011 Still stuck on this folks. The sewing machine repair man let me down - never even turned up!!! Tried needle bar height again & also polished bobbin hook but all with no luck at all. The thread is now constantly being 'cut' as it goes through the leather. Anyone help with this? Quote
CowboyBob Posted March 6, 2011 Report Posted March 6, 2011 When you time the hook do you have the needlebar go up 3/32"before the point of the hook is at the needle? Quote
Members Gamekeeper Posted March 10, 2011 Author Members Report Posted March 10, 2011 I cannot thank you enough. Back up & running now which has save my hands. Many, many thanks Dave Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.