treadle Report post Posted August 2, 2011 I have a singer 29-4 how to time the shuttle hook to the needle bar? it looks like the shuttle hook is a 180 degrees out of time. Quote Share this post Link to post Share on other sites
CowboyBob Report post Posted August 2, 2011 Did you just get this machine?It's possible that the pin in the belt pulley cam could of sheared off or put in 180 off. Bob Quote Share this post Link to post Share on other sites
treadle Report post Posted August 3, 2011 this 29-4 is a customer's,,the customer said it has been sitting up in someones barn. the foot is not feeding the material thru, we've tried changing the tension on the foot & it did not make any difference. the foot moves but it will not move the material.. Quote Share this post Link to post Share on other sites
CowboyBob Report post Posted August 3, 2011 you'll see a wingnut on the pressure bar on the back loosen the screw & move it towards the center of the machine. Bob Quote Share this post Link to post Share on other sites
treadle Report post Posted August 3, 2011 thanks, i'll try that Jay Quote Share this post Link to post Share on other sites
