Texita Report post Posted March 4, 2012 I have seen the wool burnisher that J Bianchi describes in his DVD. My question is Where do I find some small pieces of wool pad to cut the circles from? I dont want to buy a saddle pad but I dont mind buying some scraps. Thnaks Quote Share this post Link to post Share on other sites
Dwight Report post Posted March 4, 2012 I have seen the wool burnisher that J Bianchi describes in his DVD. My question is Where do I find some small pieces of wool pad to cut the circles from? I dont want to buy a saddle pad but I dont mind buying some scraps. Thnaks Actually you can get just as good, . . . if not better results with a WOOD burnisher. There are many ways of getting them, . . . but if you use John's basic idea of an electric motor, you can add the wood part on a shaft, . . . on an arbor, . . . or on a ball bearing shaft, . . . The key is to use hard wood, . . . sand it smooth (and I mean SMOOTH, type SMOOTH), . . . dress it with some bee's wax to finish the smoothing process. It will do every bit as well as the wool type, . . . I've had both. But, . . . if you have to have the wool, . . . you can buy a small piece from McMaster-Carr, . . . just Google that name, . . . find it in their on line catalog, . . . call em up, . . . give em your credit card info, . . . you'll be in business in about 48 hours. May God bless, Dwight Quote Share this post Link to post Share on other sites
Texita Report post Posted March 4, 2012 Thanks for the reply Dwight. I appreciate the voice of experience. Quote Share this post Link to post Share on other sites
joefarmer Report post Posted March 4, 2012 I bought this and it works good. You can get this at Harbor Freight Tools for $10.00 http://www.harborfreight.com/2-inch-lambs-wool-buffing-pad-kit-95993.html Quote Share this post Link to post Share on other sites
