Line Finisher For Sale

[Logans Leather]

Line Finisher For Sale

This is part of the machinery and equipment that came out of the Safety Speed Holster factory, in Bullhead, AZ.

This is one of the machines Safety Speed used for burnishing their edges. I know that they used Tip Top Finishing Wax originally to finish their edges, but the company that produced it it long since closed it's doors. After that they had Hauthaway analyze and reproduce the wax for them. I am in talks with Hauthaway about producing this again, and I should have it available for purchase soon, in black, neutral, some browns and some burgundy/cordovan shades as well. All depends on what their minimum orders are. I will post as soon as I have them available.

I cannot find any marking for what brand it is, but it is probably Landis, Champion or American. This comes complete with 1.5 horsepower motor, drive belts, 1 sanding wheel and 2 sanding cylinders, one buffing/polishing wheel, 2 edge burnishing wheels, dust collection fan and ducting, upper shelf.

I will change one of the edge burnishing wheels out for another sanding wheel if you prefer.

This machine can be used for sole sanding, edge sanding and profiling, buffing and polishing, edge burnishing, flesh side burnishing and many other processes. Attachments wheels, abrasives and other supplies for this machine are available from several sources including: United Global Supply, Saderma, Landis International, Shoe Systems Plus, Pilgrim Shoe Machine

Specifications:

Motor:

Baldor

1.5 Horse Power

1725 RPM

115volt or 230 volt (currently wired for 115 volt)

Frame Dimmensions:

49" tall (64 1/2" with the shelf)

26" wide

62" long (68" with dust collector vent)

Shelf:

59"x12"

Shaft:

1 5/16" diameter

66" long

Mounted on 3 roller bearings with grease fittings

Weight: Approximately 400 pounds

I am having multi-grooved burnishing cylinders produced for 1 5/16" shaft finishers now. they will function like the Weaver Edge Burnishers, but will need to be wrapped in canvas per Bobby/HidePounder's suggestion, as they are truned from steel instead of wood. I am waiting to hear back from the machinist before I can quote a price. The first batch should be ready any day now.

Shipping:

Due to the size and weight of this item, Local Pick Up, or Freight Service only. I can also deliver it within Southern California for a fee, which will vary depending upon how far you are from Wildomar/Lake Elsinore/Temecula area.

All freight arrangements and costs are the responsibility of the buyer There is no loading dock or forklift available, so be sure that your freight carrier has a lift gate.

Asking price $800