shadowryder Report post Posted April 3, 2013 (edited) Hi here is a belt I just made for a friend /customer,he is very happy with it, Made from 3mm veg tan leather ,with feibings acrylic dye and finished with 3 coats of 50/50 Resoline. Also with matching keyfob made the same with lacing border. Edited April 3, 2013 by shadowryder Quote Share this post Link to post Share on other sites
pault Report post Posted April 3, 2013 nice work! Quote Share this post Link to post Share on other sites
shadowryder Report post Posted April 3, 2013 (edited) thankyou, its the 1st I,ve made with this much detail,made a few plain ones before. heres a couple more photos, Edited April 3, 2013 by shadowryder Quote Share this post Link to post Share on other sites
mikesmith648 Report post Posted April 3, 2013 overall very nice.....edges could use a little work though Quote Share this post Link to post Share on other sites
shadowryder Report post Posted April 3, 2013 Hi Mike, Yeah I did the edges with beeswax and a piece in my dremel they came up ok but went like that after i applied the Resoline. Quote Share this post Link to post Share on other sites
David8386 Report post Posted April 3, 2013 Nice looking, good work. David Quote Share this post Link to post Share on other sites
RIP57 Report post Posted April 3, 2013 I like it a lot, where did you get the conchos? Quote Share this post Link to post Share on other sites
shadowryder Report post Posted April 4, 2013 Hi Conchos came from Trigg Bros, Texas,{google them}they have loads of choice,, thanks for your comment laters Quote Share this post Link to post Share on other sites
DoubleC Report post Posted April 4, 2013 Very pretty belt.....Cheryl Quote Share this post Link to post Share on other sites
shadowryder Report post Posted April 4, 2013 thankyou Cheryl,, Quote Share this post Link to post Share on other sites
Cogs Report post Posted April 6, 2013 Boy, Dude, you need a tri pod for that camera, or quit drinking! :} Nahhh... just get the tri pod. I like it. Like the conchos and the lace. The overall design is a nice presentation. Good work. Looks like 1 1/2" down to ???" I'm about to make something similar (wave type) and was wondering how low do I go with the valleys. From 1 1/2 down to... say 1"? I'll play with a design or two but would like to know what others prefer. Thanks for sharing, Bill Quote Share this post Link to post Share on other sites
shadowryder Report post Posted April 6, 2013 Hi Bill, yeah never was much good with a camera,though the customer supplied the 4 pics in 1st post. any how,the belt,its 1.1/2 inch down to 1 inch,this is made for a 32 inch waist so its quite short I have put 5 dips and 4 conchos in the belt, I made a template shaped like a dog bone,IE concho either end dip in middle I made this 5 inches from centre to centre,hope this is of help to you, and thanks for your compliments, Cheers JJ. Quote Share this post Link to post Share on other sites
