Jump to content

Recommended Posts

I completed several pancake and IWB holsters recently. Please take a look and let me know what you think. Any suggestions would be appreciated. I would particularly like comments and suggestions on the cross draw holster.

post-32192-0-22306500-1398398293_thumb.j

post-32192-0-53066500-1398398325_thumb.j

post-32192-0-91103800-1398398373_thumb.j

post-32192-0-84580600-1398398523_thumb.j

post-32192-0-84729400-1398398606_thumb.j

post-32192-0-88482100-1398398642_thumb.j

post-32192-0-29936000-1398398682_thumb.j

Share this post


Link to post
Share on other sites

Nice work. It all looks good. Personally Im not fond of exposed rivets on the back. You might consider using a T-nut between the two layers. Your slot width is a little large for my tastes. Other than that it all looks good to me. Keep it up.

Share this post


Link to post
Share on other sites

Thanks for the input. I never thought of using a T-nut in between layers. What belt slot width do you recommend?

Share this post


Link to post
Share on other sites

I normally use a 5/8" slot with. FYI on a T-nut you will need to trim the prongs on the nut so they don't stick out of the leather.

Share this post


Link to post
Share on other sites

I'll try that on the next one. Thanks.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...