Members BDAZ Posted May 31, 2014 Members Report Posted May 31, 2014 I have a Cowboy 3200 and one of my new products requires going from a longer decorative stitch to a shorter stitch for an inch or so and then back again. What is the best way to accurately move between 2 or even 3 stitch lengths? There is no scale and it seems stitch length adjustment is pretty haphazard. Thanks! Bob Quote
dirtclod Posted May 31, 2014 Report Posted May 31, 2014 (edited) Take a pencil and mark on the outside of the adjustment slot when you get a stitch lenght you like. Edited May 31, 2014 by dirtclod Quote
Members Constabulary Posted May 31, 2014 Members Report Posted May 31, 2014 can´t help but thats one reason why I like my old Singer 111 so much - it has a dial with SPI markings. Quote
Members BDAZ Posted May 31, 2014 Author Members Report Posted May 31, 2014 Take a pencil and mark on the outside of the adjustment slot when you get a stitch lenght you like. I tried that but it's not really accurate enough on my 3200. Cya! Bob Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.