Jump to content
DannyGray

Singer 29-4 With Base For Sale

Recommended Posts

I have a 29-4 machine with base in working condition. $600.00 Will ship at you expense. Email or call me for photos Dan 201-220-8488 Northwest New Jersey

.

Share this post


Link to post
Share on other sites

Do you have a picture?

Share this post


Link to post
Share on other sites

i will get some posed within the hour

Share this post


Link to post
Share on other sites

Cool, thank you.

Share this post


Link to post
Share on other sites

Here are photos of the 29-4

post-61579-0-92683800-1436557444_thumb.j

post-61579-0-23819300-1436557452_thumb.j

post-61579-0-82952500-1436557459_thumb.j

post-61579-0-47405600-1436557470_thumb.j

post-61579-0-27783200-1436557478_thumb.j

post-61579-0-85567700-1436557488_thumb.j

post-61579-0-57178200-1436557499_thumb.j

post-61579-0-68423100-1436557509_thumb.j

Share this post


Link to post
Share on other sites

Does anyone know if I can save these pictures then turn them right side up? I can't really tell what's going on here looking at it sideways.

Also, I could be mistaken, but I think if you're patient you can get one of these on eBay for between one and two hundred bucks in this condition. Can someone else verify this?

That said, I am interested and live fairly close and like the idea of being able to test it before buying. But I think $600 is really high. How negotiable are you?

Share this post


Link to post
Share on other sites

If you are looking for a $100-$200 machine this is not for you. This machine is a working machine with normal wear for its age. The one photo shows it sewing through a thick old hard leather belt. I can come down a little on the price but not much. If you have checked out ebay and craigslist you will see that this machine is in the normal range for price. This on comes with threading rod, some needles and a new belt. The cheaper machines I have seen are missing parts, rusted or broken. There is one for $150 in the area on craigslist in the Hudson Valley section and if you look close you will see the hand wheel is not attached, it has a broken shaft. It's your money so you decide if it worth it to you. These machines are great for what they were designed to do, patching.

Share this post


Link to post
Share on other sites

I think you are looking at eBay machine's that are for sale, and not one's that have actually sold. And I don't go by Craigslist. People ask all kinds of crazy money for stuff on there, that doesn't mean they are going to sell it.

But it's your machine and you can ask for whatever you want for it.

So, I'm going to pass, thanks anyway.

Good luck on your sale.

Share this post


Link to post
Share on other sites

I'm actually saving my money for a Juki anyway. This would probably have been a 150 pound mistake. So you're right, 'it's not for me', just for a different reason.

Share this post


Link to post
Share on other sites

Does anyone know if I can save these pictures then turn them right side up? I can't really tell what's going on here looking at it sideways.

Also, I could be mistaken, but I think if you're patient you can get one of these on eBay for between one and two hundred bucks in this condition. Can someone else verify this?

The asking price is the retail price for a working 29-4 patcher with a base.

Share this post


Link to post
Share on other sites

Thanks medsar for your comment.

Share this post


Link to post
Share on other sites

Ok awesome, thank you Medsar. I guess I was wrong about this machine, it is worth what you're asking, my apologies to you.

Prices still do seem lower on eBay sold listings, not sure what that's about,

Share this post


Link to post
Share on other sites

Machine has been sold.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

×
×
  • Create New...