Yanni Report post Posted November 13, 2015 I have a Fortuna Skiver and no matter what I do the bell knife's edge is not sharp enough. I've got the feeling it has to do with the angle of the sharpening but cannot figure out how to change that. I have change the sharpening stone with a brand new original Fortuna, I always sharpen the sharpening stone with that special wheel tool. I'm confused....any help? Thanks Quote Share this post Link to post Share on other sites
25b Report post Posted November 13, 2015 (edited) Is the blade in the same position as you have it when skiving? If not, put it at that position and sharpen it from there. Also, when you say you're using a "tool" to sharpen it, are you talking about the deburring tool or the stone wheel built into the machine (which should spin while the machine is on if it's engaged)? Finally, watch this video... https://youtu.be/ysGu3LEitYc It's for an FAV machine, but is very, very similar to the Fortuna... Edited November 13, 2015 by 25b Quote Share this post Link to post Share on other sites
