Jump to content

Anyone Familiar With Cnc Or Laser Cutting Machine?

Recommended Posts

For cutting out templates out of metal which is prefered? Anyone familiar with the cost of CNC or laser, which is more economical?

Recommendations to any companies that offer decent value?

Share this post

Link to post
Share on other sites

metal will be a much costlier higher power unit. I use a laser all the time and use acrylic to make my templates. I use a machine with a 3'x4'bed with 150 watts. Now I can cut very very thin metals.. but you will need a fiber laser or a lot more power.

you might try a waterjet or cnc plasma cutter for metal..

Edited by biglew

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...