Jump to content
Toastie

Headpiece help

Recommended Posts

My wife is looking to do a Star Wars character to get into the 501st. The character she is doing is Darth Traya. This character has a leather headpiece and I have a few questions

I got a 4/5 ounce single shoulder from Tandy leather to work with and I am planning on wet forming it to her head. I have attached a few pictures

My question is what is a good dye or paint for the black, and what about that red. What can I use on the head piece to keep it from drying out

Also is Tandy the only good place to order leather. I need a 3 inch wide strap that is 72" long and all I find is the 50" long ones

 

14TrayaHeadPieceFinished.jpg

 

8TrayaHeadPeice1.jpg

Share this post


Link to post
Share on other sites

For pure black Fiebings Pro Oil should work. I believe any acrylic paint will work for the red area as long as you have a topcoat finish. 

http://springfieldleather.com/ has a great selection of products. 

I have never purchased from Zack White but here is a strip that might work: http://www.zackwhite.com/3in-Natural-Vegetable-Tanned-Leather-Strips--XXL-Length_p_1372.html

Edited by Sceaden

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...