WorkWithYerHands Report post Posted September 9, 2017 (edited) I have a set of hand setters that didn't come with any instructions, however I noted the numbers on them and have sorted out what sizes each should work with, but I can't find anywhere that has a full list or chart of what number for each type of setter goes with which size and type of snaps, in case I wanted to use different snaps than these. Also I have some snaps that are 8.5mm and can't find anywhere that sells setters for that size. Any ideas of where to find them, or even what words/numbers to search for? Thanks! Edited September 9, 2017 by WorkWithYerHands Quote Share this post Link to post Share on other sites
Mattsbagger Report post Posted September 9, 2017 What brand are they to start with? If you look at Tandy they have sets and show how to use. Quote Share this post Link to post Share on other sites
WorkWithYerHands Report post Posted September 10, 2017 I'm not sure of the brand. They're not Tandy as that seems to be a different system (I'm in the UK, so sizes are listed in metric). So #633 setter goes with 12.5mm s spring snaps, #201 with 10mm ring spring snaps, #831 with 15 or 17mm s spring snaps. that's what came in my kit. Quote Share this post Link to post Share on other sites
fredk Report post Posted September 10, 2017 Contact Le Prevo in Newcastle and ask them. They just might know something Quote Share this post Link to post Share on other sites
